Suspension service in Dällikon Book now

30-day returns Learn more

Order by 5 pm – with you tomorrow Learn more

Free shipping from CHF 250 Learn more

Galfer  |  SKU: FD469G1053
28% off

Galfer Performance brake pads for SRAM HRD up to 2019 – Red 22, Force 22, Rival 22

Sale price CHF 11.40 instead of Regular price CHF 15.90
Tax included Shipping calculated at checkout.

Fits: SRAM / Avid · Galfer line: Performance


Galfer Performance brake pads for SRAM HRD up to 2019 – Red 22, Force 22, Rival 22: Beim Lieferanten verfügbar. Innerhalb von 5 Werktagen bei dir.


Pickup available at MTB-Raceshop Dällikon

Nach Terminabsprache, meist innert 1–2 Werktagen bereit

Disc due as well? As a setIn a set, the pads cost CHF 2.00 less.

Choose the disc and the diameter. We add the pads and the disc to your basket.

Does it fit your bike?

Send us the brand, model and model year – for brake pads ideally with a photo of the caliper. We'll tell you what fits.

Ask a question

Description

The Galfer Performance brake pad FD469G1053 fits into one-piece SRAM brake calipers on road bikes up to model year 2019 – Red 22, Force 22, Rival 22, Apex 1, and CX1 – as well as SRAM Level TLM and Level Ultimate from 2017 to 2019. The black Performance compound G1053 is Galfer’s all-rounder for XC, trail, and enduro: high braking power, fade-resistant, and very durable, even in mud.

Compatibility

According to Galfer, the pad shape FD469 fits these brakes:

  • SRAM Road: HRD up to 2019, All Road 2017 to 2019, Red 22, Force 22, Force 1, Rival 22, Rival 1, Apex 1 and CX1, as well as Red AXS with monoblock caliper
  • SRAM MTB: Level TLM and Level Ultimate from model years 2017 to 2019

Before purchasing, check the model and model year of your brake caliper or compare your old pad with the image and dimensions on this page. For Red, Force, and Rival AXS with a two-piece caliper, the FD427 shape fits (Galfer Road for SRAM Level, DB and Avid Elixir). For the Level TLM and Ultimate from 2019, Galfer specifies different shapes depending on the source – if in doubt, compare with your old pad.

Galfer Performance G1053: the all-rounder

Galfer gives the Performance compound top marks for durability and rates braking power, fade resistance, and performance in wet and muddy conditions as good. This compound was previously known as Standard.

  • Organic-semi-metallic, asbestos-free friction compound
  • For XC, trail, and enduro
  • Black backing plate
  • Dimensions according to Galfer: 30.9 × 26.3 mm

Which Galfer compound is right for you?

We offer the FD469 pad shape in five Galfer compounds. We have found Galfer Pro to work well for the front, and Galfer E-Bike for the rear.

  • Advanced (red): plenty of reserves in wet and muddy conditions, very long durability
  • Pro (green): the racing compound with the highest braking power; wears out faster
  • E-Bike (purple): semi-metallic and ECE R90 certified, for E-MTBs and heavier riders
  • Road (blue): for road bikes and gravel bikes

You can find more on the differences in our brake pad buying guide.

What's in the box

1 pair of pads for one caliper. For front and rear, order 2.

Disc due as well?

New pads only brake properly on a disc in good condition. Measure the disc when you change the pads: if it is below the minimum thickness, warped or deeply scored, it's best to replace it together with the pads. Matching Galfer discs:

  • Shark: 6-bolt · Center Lock, one-piece, for enduro, downhill and e-MTB
  • Shark EVO: 6-bolt · Center Lock, two-piece with aluminium carrier for even better cooling
  • Wave Fixed 2.0 mm: 6-bolt · Center Lock, for e-MTBs, enduro and heavier riders
  • Wave Fixed 1.8 mm: 6-bolt · Center Lock, the classic Wave in 1.8 mm, 160 to 203 mm
  • Wave Floating V2: 6-bolt, two-piece with coloured pins, 180 and 203 mm
  • Wave Fixed Road & Gravel: 6-bolt · Center Lock · Fulcrum AFS, for road and gravel bikes
  • SHARK Road Center Lock: 140 mm · 160 mm, two-piece with aluminium carrier and Shark Fins

Compare all discs: Galfer brake discs. With 2.0 mm discs, check that your caliper has room for them.

Installation and replacement

  • Always replace all pads in a brake caliper at the same time.
  • Push the pistons back straight before inserting, ideally using a plastic lever – never use a screwdriver directly on the piston.
  • Keep discs and pads free of grease; Galfer Brake Cleaner is suitable for cleaning.
  • SRAM specifies 3 mm as the wear limit for the pad and backing plate combined.

Frequently asked questions

Does the pad fit SRAM Force AXS?

No, Force AXS and Rival AXS with a two-piece caliper require the FD427 shape. The pad is suitable for the Red AXS monoblock caliper.

Does the pad fit my SRAM Level TLM?

Yes, for Level TLM and Ultimate from model years 2017 to 2019. For newer Level models, Galfer lists the FD427 and FD513 shapes.

How do I bed in new pads?

On a flat, safe stretch: brake several times from medium speed down to walking pace, using each brake individually.

What is Galfer Performance suitable for?

For almost everything from XC to trail and enduro. If you often ride in wet conditions, take a look at Galfer Advanced. For e-MTBs, Galfer E-Bike is a better fit.

We ship Galfer brake pads from our Swiss warehouse. Unsure if the pad fits? Send us a photo of your brake caliper—we will tell you which pad is the right one.

Specifications

  • Fits
    SRAM / Avid
  • Galfer line
    Performance
  • Compound
    G1053 (schwarz)
  • Pad shape
    FD469
  • Dimensions
    30,9 × 26,3 mm

Manuals & downloads (2)

Secure payment

Payment methods

  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Twint
  • Union Pay
  • Visa

Your payment is processed securely. We don't store credit card details and have no access to them.