Galfer SHARK Road brake disc Center Lock 160 mm, two-piece
Mount: Center Lock · Thickness: 1,8 mm
Galfer SHARK Road brake disc Center Lock 160 mm, two-piece - 160 mm: Beim Lieferanten verfügbar. Innerhalb von 5 Werktagen bei dir.
Pickup available at MTB-Raceshop Dällikon
Nach Terminabsprache, meist innert 1–2 Werktagen bereit
Does it fit your bike?
Does it fit your bike?
Send us the brand, model and model year – for brake pads ideally with a photo of the caliper. We'll tell you what fits.
Description
Description
The Galfer SHARK Road Center Lock 160 mm is Galfer's two-piece brake disc for road and gravel bikes with Center Lock hubs: a hardened stainless steel braking ring on an aluminium carrier, with internal "Shark Fins" for cooling. It is 1.8 mm thick and, according to Galfer, weighs 102 g.
Features
- Two-piece: hardened stainless steel braking ring, CNC-machined 7075-T6 aluminium carrier, joined with 8 mm stainless steel hollow rivets
- Wavy braking track (Wave design), according to Galfer with precise modulation
- Internal "Shark Fins": according to Galfer, they dissipate heat and keep braking performance consistent even on long descents
- Higher lateral stiffness according to Galfer: both pistons work evenly and the pads wear evenly
- Dedicated Center Lock lockring for the road, according to Galfer with serrations so that it does not come loose even on long, hard descents
- Diameter 160 mm, thickness 1.8 mm, weight 102 g according to Galfer
- Developed with the Lotto Cycling Team
Which size fits?
Road and gravel bikes mostly run 140 or 160 mm. The frame and fork manufacturers specify which size is permitted on your bike. The SHARK Road is also available in 140 mm. Flat-mount brake mounts are built for a specific disc size – to switch to 160 mm, Galfer offers flat-mount adapters for the front and rear.
SHARK Road or Wave Fixed Road & Gravel?
For road and gravel, Galfer has two disc families:
- SHARK Road Center Lock in 160 mm (this disc) or 140 mm: two-piece with aluminium carrier and Shark Fins, according to Galfer particularly stiff laterally and well cooled. 91 g (140 mm) or 102 g (160 mm). Center Lock only.
- Wave Fixed Road & Gravel Center Lock: one-piece stainless steel and lighter, according to the manufacturer 76 g (140 mm) or 98 g (160 mm). In 140, 160 and 180 mm.
- Wave Fixed Road & Gravel 6-bolt: for hubs with 6-bolt mounting, in 140, 160 and 180 mm.
- Wave Fixed Road & Gravel for Fulcrum AFS: for hubs with Fulcrum's AFS system, in 140 and 160 mm.
What's in the box
1 brake disc with the matching Center Lock lockring. For front and rear, order 2 discs.
Matching pads
A new disc is best paired with new pads, so that both bed in cleanly together. Pads for your brake: Shimano · SRAM & Avid · Magura · Hope & Trickstuff · Formula · Hayes · TRP
All Galfer discs compared: Galfer brake discs.
Fitting
- The SHARK Road is secured to the Center Lock hub with its lockring. Tighten it with the right tool to the torque specified by your hub or brake manufacturer.
- Keep the disc and pads free of grease; the Galfer Brake Cleaner is ideal for cleaning.
- Bedding in new discs: on a flat, safe stretch, brake several times from medium speed down to walking pace, one brake at a time.
Frequently asked questions
What are the benefits of the two-piece design?
According to Galfer, the aluminium carrier keeps the disc stiff at low weight, while the hardened stainless steel braking ring is durable and stays consistent under heat. The Shark Fins also dissipate heat.
Does the SHARK Road fit a hub with Fulcrum AFS?
Galfer specifies the SHARK Road for Center Lock and gives no information on AFS. For hubs with Fulcrum AFS, use the Wave Fixed Road & Gravel for Fulcrum AFS instead. If your hub or your wheelset documentation says "AFS", you have this system. If in doubt, send us a photo of the hub.
When do I need to replace the disc?
When it is below the minimum thickness, warped or deeply scored. Galfer marks the minimum thickness on the disc ("MIN. TH."), usually 0.5 mm below the new thickness. Measure the thickness with a micrometer at several points in the middle of the braking surface.
Do I need new pads with a new disc?
Recommended, especially if the old pads are heavily worn or glazed. A new disc and new pads bed in best together. You will find matching pads in the brake pad buying guide.
More about the brand on the Galfer brand page. Not sure which size or mount fits? Get in touch – tell us your frame, fork and brake and we will tell you what fits.
Specifications
Specifications
-
Rotor model
-
Mount
-
Rotor thickness1,8 mm
Manuals & downloads (1)
Manuals & downloads (1)
Secure payment
Payment methods
Your payment is processed securely. We don't store credit card details and have no access to them.






