Galfer Advanced brake pads for SRAM HRD up to 2019 – Red 22, Force 22, Rival 22
Fits: SRAM / Avid · Galfer line: Advanced
Galfer Advanced brake pads for SRAM HRD up to 2019 – Red 22, Force 22, Rival 22: Beim Lieferanten verfügbar. Innerhalb von 5 Werktagen bei dir.
Pickup available at MTB-Raceshop Dällikon
Nach Terminabsprache, meist innert 1–2 Werktagen bereit
Disc due as well? As a setIn a set, the pads cost CHF 2.00 less.
Choose the disc and the diameter. We add the pads and the disc to your basket.
- 1× PadsGalfer Advanced brake pads for SRAM HRD up to 2019 – Red 22, Force 22, Rival 22 CHF 16.80
- 1× Disc
- Set discount −CHF 2.00
Same size as before? If not, you need a different adapter: Adapter Finder
Does it fit your bike?
Does it fit your bike?
Send us the brand, model and model year – for brake pads ideally with a photo of the caliper. We'll tell you what fits.
Description
Description
The Galfer Advanced brake pad FD469G1851 fits into one-piece SRAM brake calipers on road bikes up to model year 2019 – Red 22, Force 22, Rival 22, Apex 1, and CX1 – as well as SRAM Level TLM and Level Ultimate from 2017 to 2019. The red Advanced compound G1851 is made for changing conditions: direct response, progressive braking power, plenty of reserves in wet and muddy conditions, and a very long service life.
Compatibility
According to Galfer, the pad shape FD469 fits these brakes:
- SRAM Road: HRD up to 2019, All Road 2017 to 2019, Red 22, Force 22, Force 1, Rival 22, Rival 1, Apex 1 and CX1, as well as Red AXS with monoblock caliper
- SRAM MTB: Level TLM and Level Ultimate from model years 2017 to 2019
Before purchasing, check the model and model year of your brake caliper or compare your old pad with the image and dimensions on this page. For Red, Force, and Rival AXS with a two-piece caliper, the FD427 shape fits (Galfer Road for SRAM Level, DB and Avid Elixir). For the Level TLM and Ultimate from 2019, Galfer specifies different shapes depending on the source – if in doubt, compare with your old pad.
Galfer Advanced G1851: for wet and mud
Galfer gives the Advanced compound the top rating for performance in wet and mud, and for durability. In terms of braking power and fading resistance, it is on par with Performance and just below Pro.
- Organic semi-metallic, asbestos-free friction compound
- For trail, enduro and downhill in all weather conditions
- Red backing plate
- Dimensions according to Galfer: 30.9 × 26.3 mm
Which Galfer compound is right for you?
We offer the FD469 pad shape in five Galfer compounds. We have found Galfer Pro to work well for the front, and Galfer E-Bike for the rear.
- Performance (black): the durable all-rounder for trail and enduro
- Pro (green): the racing compound with the highest braking power; wears out faster
- E-Bike (purple): semi-metallic and ECE R90 certified, for E-MTBs and heavier riders
- Road (blue): for road bikes and gravel bikes
You can find more on the differences in our brake pad buying guide.
What's in the box
1 pair of pads for one caliper. For front and rear, order 2.
Disc due as well?
New pads only brake properly on a disc in good condition. Measure the disc when you change the pads: if it is below the minimum thickness, warped or deeply scored, it's best to replace it together with the pads. Matching Galfer discs:
- Shark: 6-bolt · Center Lock, one-piece, for enduro, downhill and e-MTB
- Shark EVO: 6-bolt · Center Lock, two-piece with aluminium carrier for even better cooling
- Wave Fixed 2.0 mm: 6-bolt · Center Lock, for e-MTBs, enduro and heavier riders
- Wave Fixed 1.8 mm: 6-bolt · Center Lock, the classic Wave in 1.8 mm, 160 to 203 mm
- Wave Floating V2: 6-bolt, two-piece with coloured pins, 180 and 203 mm
- Wave Fixed Road & Gravel: 6-bolt · Center Lock · Fulcrum AFS, for road and gravel bikes
- SHARK Road Center Lock: 140 mm · 160 mm, two-piece with aluminium carrier and Shark Fins
Compare all discs: Galfer brake discs. With 2.0 mm discs, check that your caliper has room for them.
Installation and replacement
- Always replace all pads in a brake caliper at the same time.
- Push the pistons back straight before inserting, ideally using a plastic lever – never use a screwdriver directly on the piston.
- Keep discs and pads free of grease; Galfer Brake Cleaner is suitable for cleaning.
- SRAM specifies 3 mm as the wear limit for the pad and backing plate combined.
Frequently asked questions
Does the pad fit SRAM Force AXS?
No, Force AXS and Rival AXS with a two-piece caliper require the FD427 shape. The pad is suitable for the Red AXS monoblock caliper.
Does the pad fit my SRAM Level TLM?
Yes, for Level TLM and Ultimate from model years 2017 to 2019. For newer Level models, Galfer lists the FD427 and FD513 shapes.
How do I bed in new pads?
On a flat, safe stretch: brake several times from medium speed down to walking pace, using each brake individually.
What is Galfer Advanced suitable for?
For anyone who often rides in the wet and mud and wants long pad life. For racing with maximum braking power, Galfer Pro is the one.
We ship Galfer brake pads from our Swiss warehouse. Unsure if the pad fits? Send us a photo of your brake caliper—we will tell you which pad is the right one.
Specifications
Specifications
-
FitsSRAM / Avid
-
Galfer line
-
Compound
-
Pad shape
-
Dimensions
Secure payment
Payment methods
Your payment is processed securely. We don't store credit card details and have no access to them.
