Galfer Pro brake pads for Hope V4 and Trickstuff Maxima

The Galfer Pro brake pad FD466G1554T fits the Hope V4, the Trickstuff Maxima, and the Lewis LHT. The green Pro compound G1554T is Galfer's racing compound: maximum braking power, highly heat-resistant, and, according to Galfer, ready to use without bed-in time.

Compatibility

According to Galfer, the pad shape FD466 fits the following brakes:

• Hope: V4
• Trickstuff: Maxima
• Lewis: LHT

Before purchasing, check the model and year of your brake caliper or compare your old pad with the image and dimensions on this page. For the Hope E4, the FD465 shape fits (Galfer Pro for Hope E4 and RX4 Shimano); for the M4, the FD453 shape fits (Galfer Pro for Hope M4).

Galfer Pro G1554T: the racing compound

Galfer gives the Pro compound top marks for braking power and fading resistance, and a good rating for wet and muddy conditions. Galfer rates the durability lower than its other compounds: Pro wears out faster and is designed for racing, bike parks, and long, steep descents.

• Organic-semi-metallic, asbestos-free friction compound
• Ready to use without bed-in time, according to Galfer
• Progressive modulation and high temperature resistance
• Green backing plate
• Dimensions according to Galfer: 40.0 × 26.0 mm

Which Galfer compound is right for you?

We offer the FD466 pad shape in four Galfer compounds. We have found the Galfer Pro to be excellent for the front and the Galfer E-Bike for the rear.

• Performance (black): the durable all-rounder for trail and enduro
• Advanced (red): high reserves in wet and muddy conditions, very long service life
• E-Bike (purple): semi-metallic and ECE R90 certified, for e-MTBs and heavier riders

You can find more on the differences in our Brake Pad Buying Guide.

What's in the box

1 pair of pads for one caliper. For front and rear, order 2.

Disc due as well?

New pads only brake properly on a disc in good condition. Measure the disc when you change the pads: if it is below the minimum thickness, warped or deeply scored, it's best to replace it together with the pads. Matching Galfer discs:

• Shark: 6-bolt · Center Lock, one-piece, for enduro, downhill and e-MTB
• Shark EVO: 6-bolt · Center Lock, two-piece with aluminium carrier for even better cooling
• Wave Fixed 2.0 mm: 6-bolt · Center Lock, for e-MTBs, enduro and heavier riders
• Wave Fixed 1.8 mm: 6-bolt · Center Lock, the classic Wave in 1.8 mm, 160 to 203 mm

Compare all discs: Galfer brake discs. With 2.0 mm discs, check that your caliper has room for them.

Installation and replacement

• Always replace all pads in a brake caliper at the same time.
• Push the pistons back straight before inserting, ideally using a plastic lever – never use a screwdriver directly on the piston.
• Keep the disc and pads free of grease; Galfer Brake Cleaner is suitable for cleaning.
• Adhere to the wear limits set by your brake manufacturer.

Frequently Asked Questions

Does the pad fit the Hope E4?

No, the E4 uses a different pad shape: FD465.

Does the pad fit the Trickstuff Direttissima?

No. The Direttissima from 2022 onwards and the C42 use the FD459 shape; older Direttissima models up to 2021 use the FD247 shape.

Do I need to bed in the Galfer Pro?

According to Galfer, the Pro compound is ready to use without a bed-in period. However, perform a few stops on a flat, safe section before your first descent to get a feel for the braking.

How long does a Galfer Pro pad last?

This depends on the terrain, weather, and riding style. Pro wears out faster than other Galfer compounds. If service life is more important to you, choose Galfer Advanced, Galfer E-Bike, or Galfer Performance in the same shape.

We ship Galfer brake pads from our Swiss warehouse. Unsure if the pad fits? Send us a photo of your brake caliper – we will let you know which pad you need.