Galfer E-Bike brake pads for Hope V4 and Trickstuff Maxima

The Galfer E-Bike Brake Pad FD466G1652 fits the Hope V4, the Trickstuff Maxima, and the Lewis LHT. The purple G1652 E-Bike compound is semi-metallic and ECE R90 certified. It is designed for the weight and speed of E-MTBs, is highly heat-resistant and durable, and is also suitable for heavy riders and gravity bikes without motors.

Compatibility

According to Galfer, the pad shape FD466 fits these brakes:

• Hope: V4
• Trickstuff: Maxima
• Lewis: LHT

Before purchasing, check the model and year of manufacture of your brake caliper, or compare your old pad with the image and dimensions on this page. For the Hope E4, the shape FD465 fits (Galfer Pro for Hope E4 and RX4 Shimano); for the M4, the shape FD453 fits (Galfer Pro for Hope M4).

Galfer E-Bike G1652: for E-MTBs and heavy bikes

Galfer gives the E-Bike compound top marks for performance in wet and muddy conditions and for durability. ECE R90 is a test standard for replacement brake pads for motor vehicles.

• Semi-metallic, asbestos-free friction compound
• ECE R90 certified
• For E-MTBs, heavy riders, and gravity bikes
• Purple backing plate
• Dimensions according to Galfer: 40.0 × 26.0 mm

Which Galfer compound fits?

We offer the pad shape FD466 in four Galfer compounds. We have found the Galfer Pro to be effective for the front, and the Galfer E-Bike for the rear.

• Performance (black): the durable all-rounder for trail and enduro
• Advanced (red): plenty of reserve in wet and muddy conditions, very long durability
• Pro (green): the racing compound with the highest braking power, wears out faster

You can find more on the differences in the Brake Pad Buying Guide.

What's in the box

1 pair of pads for one caliper. For front and rear, order 2.

Disc due as well?

New pads only brake properly on a disc in good condition. Measure the disc when you change the pads: if it is below the minimum thickness, warped or deeply scored, it's best to replace it together with the pads. Matching Galfer discs:

• Shark: 6-bolt · Center Lock, one-piece, for enduro, downhill and e-MTB
• Shark EVO: 6-bolt · Center Lock, two-piece with aluminium carrier for even better cooling
• Wave Fixed 2.0 mm: 6-bolt · Center Lock, for e-MTBs, enduro and heavier riders
• Wave Fixed 1.8 mm: 6-bolt · Center Lock, the classic Wave in 1.8 mm, 160 to 203 mm

Compare all discs: Galfer brake discs. With 2.0 mm discs, check that your caliper has room for them.

Installation and replacement

• Always replace all pads in a brake caliper at the same time.
• Push the pistons straight back before inserting, preferably using a plastic lever – never use a screwdriver directly on the piston.
• Keep the disc and pads free of grease; Galfer Brake Cleaner is suitable for cleaning.
• Adhere to the wear limit set by your brake manufacturer.

Frequently asked questions

Does the pad fit the Hope E4?

No, the E4 uses a different pad shape: FD465.

Does the pad fit the Trickstuff Direttissima?

No. The Direttissima from 2022 onwards and the C42 use the shape FD459; older Direttissima models up to 2021 use the shape FD247.

How do I bed in new pads?

On a flat, safe stretch: brake multiple times from medium speed down to walking pace, using each brake individually.

Can I also use E-Bike pads on a bike without a motor?

Yes. The compound is designed for high loads and is also suitable for heavy riders and gravity bikes without motors. We have found the Galfer E-Bike works well for the rear.

We ship Galfer brake pads from our Swiss warehouse. Unsure if the pad fits? Send us a photo of your brake caliper – we will tell you which pad fits.