Galfer Performance brake pads for Hope E4 and RX4 Shimano

The Galfer Performance brake pad FD465G1053 fits the Hope E4 and the Hope RX4 in the Shimano version, as well as the Lewis LH4 and LV4. The black Performance G1053 compound is Galfer's all-rounder for XC, trail, and enduro: high braking power, fade-resistant, and very durable, even in mud.

Compatibility

According to Galfer, the pad shape FD465 fits these brakes:

• Hope: E4 and RX4 Shimano
• Lewis: LH4 and LV4

Before purchasing, please verify the model and year of your brake caliper or compare your old pad with the image and dimensions on this page. According to Galfer, the RX4 in the SRAM version requires a different shape. For the Hope V4, the shape FD466 fits (Galfer Performance for Hope V4 and Trickstuff Maxima), and for the M4, the shape FD453 (Galfer Performance for Hope M4).

Galfer Performance G1053: the all-rounder

Galfer gives the Performance compound the top rating for durability and rates braking power, fade resistance, and performance in wet and muddy conditions as good. This compound was formerly known as Standard.

• Organic-semimetallic, asbestos-free friction compound
• For XC, trail, and enduro
• Black backing plate
• Dimensions according to Galfer: 37.0 × 29.0 mm

Which Galfer compound is the right one?

We stock the FD465 pad shape in four Galfer compounds. We have found the Galfer Pro to be effective for the front and the Galfer E-Bike for the rear.

• Advanced (red): plenty of reserves in wet and muddy conditions, very long durability
• Pro (green): the racing compound with the highest braking power; wears out faster
• E-Bike (purple): semi-metallic and ECE R90 certified, for E-MTBs and heavier riders

You can find more on the differences in our brake pad buying guide.

What's in the box

1 pair of pads for one caliper. For front and rear, order 2.

Disc due as well?

New pads only brake properly on a disc in good condition. Measure the disc when you change the pads: if it is below the minimum thickness, warped or deeply scored, it's best to replace it together with the pads. Matching Galfer discs:

• Shark: 6-bolt · Center Lock, one-piece, for enduro, downhill and e-MTB
• Shark EVO: 6-bolt · Center Lock, two-piece with aluminium carrier for even better cooling
• Wave Fixed 2.0 mm: 6-bolt · Center Lock, for e-MTBs, enduro and heavier riders
• Wave Fixed 1.8 mm: 6-bolt · Center Lock, the classic Wave in 1.8 mm, 160 to 203 mm

Compare all discs: Galfer brake discs. With 2.0 mm discs, check that your caliper has room for them.

Installation and replacement

• Always replace all pads in a brake caliper at the same time.
• Push the pistons back straight before insertion, preferably with a plastic lever – never use a screwdriver directly on the piston.
• Keep the disc and pads free of grease; the Galfer Brake Cleaner is suitable for cleaning.
• Adhere to the wear limit specified by your brake manufacturer.

Frequently asked questions

Does the pad fit the Hope RX4+?

Galfer only lists the RX4 in the Shimano version for this shape. Please ask us about the RX4+ before ordering.

Does the pad fit the Hope V4?

No, the V4 uses a different pad shape: FD466.

How do I bed in new pads?

On a flat, safe stretch: brake several times from medium speed down to walking pace, using each brake individually.

What is the Galfer Performance suitable for?

For almost everything from XC to trail and enduro. If you often ride in wet conditions, take a look at Galfer Advanced. For E-MTBs, Galfer E-Bike is a better fit.

We supply Galfer brake pads from our Swiss warehouse. Unsure if the pad fits? Send us a photo of the brake caliper – we will let you know which pad you need.