Detent balls 3/32″ for FOX GRIP2 VVC – set of 2

Short Description

Two hardened 3/32″ steel balls with a diameter of 2.381 mm as a compatible replacement for the detent mechanism of the HSC compression adjuster on a FOX GRIP2 VVC damper cartridge. Suitable if a click ball was lost during the removal of the adjustment knobs.

Not an original FOX part. Springs are not included.

Product Description

Replacement for lost GRIP2 VVC click balls

Located under the high-speed compression adjuster of a FOX GRIP2 VVC cartridge are small, spring-loaded steel balls. They create the clearly defined clicks of the adjustment knob and can easily pop out when removing the compression knobs.

This set contains two hardened 3/32″ steel balls with a diameter of 2.381 mm. This size corresponds to the ball size of 0.0938″ specified in the FOX parts diagram.

Advantages

• Matching standard size of 3/32″ or 2.381 mm
• Two balls for both detent positions of the HSC adjuster
• Hardened, ground, and polished steel
• Manufactured according to DIN 5401
• Separate replacement solution without needing a full adjustment knob kit
• Practical set of 2

Compatibility

Intended for the click mechanism of the HSC compression adjuster on:

• FOX 34 with GRIP2 VVC, model year 2021–2024
• FOX 36 with GRIP2 VVC, model year 2021–2024
• FOX 38 with GRIP2 VVC, model year 2021–2024
• FOX 40 with GRIP2 VVC, model year 2021–2024

Not automatically compatible with GRIP2 cartridges without VVC, GRIP X, GRIP X2, FIT4, or other FOX adjusters. Check the cartridge generation and ball diameter before ordering.

Technical Specifications

Scope of Delivery

• 2 click balls with 2.381 mm diameter

Springs, adjustment knobs, screws, lubricants, and tools are not included.

Installation Note

Both ball/spring sets must be fully and correctly installed. After installation, check that the HSC and LSC can move freely and that the click positions engage cleanly.

Work on the damper cartridge should only be performed with the necessary technical knowledge and in accordance with FOX service specifications.

Frequently Asked Questions

Which ball size does the GRIP2 VVC click mechanism require?
The FOX parts diagram specifies a diameter of 0.0938″. This corresponds to the standard size 3/32″ or 2.381 mm.

Why does the set contain two balls?
FOX points out during assembly that both ball/spring sets must be present in the HSC adjuster.

Are the small springs included as well?
No. The scope of delivery includes only two steel balls.

Are these original FOX spare parts?
No. These are compatible industrial steel balls of the correct size. FOX specifies Grade 25 for the original ball; the offered Brütsch/Rüegger version is class G40.

Does the set also fit GRIP X or GRIP X2?
Compatibility for these cartridges is not confirmed. This item should only be sold for the explicitly listed GRIP2 VVC applications.