BYB Telemetry V3 Pro – Professional Suspension Telemetry System

The telemetry system for racers, teams, and workshops. The BYB Telemetry V3 Pro records fork, shock, both brakes, and wheel speed at 1000 Hz. This allows you to make setup decisions based on data instead of feel – and see in black and white after every run what a change has achieved.

The system can usually be mounted in under 15 minutes, with no drilling required. You don't need a calibration routine: the V3 Pro sets the zero point itself while riding, or manually if desired. Analysis is performed on a computer (Windows, Mac) or directly at the track via the app (iOS, Android).

Which kit is right for you?

• MTB: 210 mm fork sensor, 80 mm shock sensor, and MTB mounts – for downhill, enduro, freeride, XC, and e-MTB.
• MX: 350 mm fork sensor and 150 mm shock sensor for the longer travel found in motocross, plus MX mounts.
• MTB/MX: both sensor sets and both mount sets – for workshops, suspension tuners, and teams with multiple vehicle types.

Scope of delivery

• 1× BYB Telemetry V3 Pro Acquisition Unit
• Fork sensor with carbon protection: 210 mm (MTB), 350 mm (MX), or both (MTB/MX)
• Shock sensor with carbon protection: 80 mm (MTB), 150 mm (MX), or both (MTB/MX)
• 2× digital brake sensor
• 1× wheel speed sensor
• 1× GPS antenna
• Complete mounting kit made of metal and plastic (MTB, MX, or both)
• Software for Windows and Mac, app for iOS and Android – updates included, no subscription

Technical data

• 5 analog channels at 1000 Hz each, freely configurable allocation
• Standard configuration: fork, shock, wheel speed, front brake, rear brake
• Expandable with accelerometers (100/200 g), pressure, temperature, and steering angle sensors
• Vehicle modes for MTB, Moto, Quad, and car, plus an OPEN mode for custom sensors
• Integrated 6-axis IMU (±16 g, ±1000 °/s) and 25 Hz GPS
• Bluetooth sensors: heart rate, power, and cadence
• Compatible with BYB Chrono External Triggers
• Raw data export as CSV
• Over 9 hours of continuous recording, auto-pause
• Waterproof, 40 × 50 × 80 mm, 80 g

V3 or V3 Pro?

Both systems use the same high-precision sensors. The BYB Telemetry V3 measures two channels at 500 Hz and is sufficient for fine-tuning the fork and shock on your own bike. You need the V3 Pro if you want to measure brakes and wheel speed, export raw data, or support other riders' bikes. You can see all the differences in the comparison on our BYB page.

Want to test it first?

Rent the V3 Pro for seven days with instruction in Dällikon or book a suspension fitting with a coach at a track of your choice.

From your official BYB Point

MTB-Raceshop is an official BYB Point and the Swiss distributor for BYB Tech. You pay a Swiss price including VAT with no import duties and have a single point of contact in Switzerland for advice, warranty, and support.