{"title":"Suspension fork spare parts","description":"\u003cp\u003eHere you will find suspension fork spare parts for Öhlins, RockShox, and FOX: lower legs, stanchions, bushings, air springs, cartridges, adjusters, seals, Bottomless Tokens, and thru-axles.\u003c\/p\u003e\u003cp\u003eWe will help you find the right part for your fork's model, generation, and model year, and can install it during a fork service upon request.\u003c\/p\u003e","products":[{"product_id":"fox-grip2-vvc-klickkugel-3-32","title":"Detent balls 3\/32″ for FOX GRIP2 VVC – set of 2","description":"\u003cp\u003e\u003cstrong\u003eShort Description\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwo hardened 3\/32″ steel balls with a diameter of 2.381 mm as a compatible replacement for the detent mechanism of the HSC compression adjuster on a FOX GRIP2 VVC damper cartridge. Suitable if a click ball was lost during the removal of the adjustment knobs.\u003c\/p\u003e\u003cp\u003eNot an original FOX part. Springs are not included.\u003c\/p\u003e\u003cp\u003eProduct Description\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReplacement for lost GRIP2 VVC click balls\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLocated under the high-speed compression adjuster of a FOX GRIP2 VVC cartridge are small, spring-loaded steel balls. They create the clearly defined clicks of the adjustment knob and can easily pop out when removing the compression knobs.\u003c\/p\u003e\u003cp\u003eThis set contains two hardened 3\/32″ steel balls with a diameter of 2.381 mm. This size corresponds to the ball size of 0.0938″ specified in the FOX parts diagram.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdvantages\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003eMatching standard size of 3\/32″ or 2.381 mm\u003c\/li\u003e \u003cli\u003eTwo balls for both detent positions of the HSC adjuster\u003c\/li\u003e \u003cli\u003eHardened, ground, and polished steel\u003c\/li\u003e \u003cli\u003eManufactured according to DIN 5401\u003c\/li\u003e \u003cli\u003eSeparate replacement solution without needing a full adjustment knob kit\u003c\/li\u003e \u003cli\u003ePractical set of 2\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIntended for the click mechanism of the HSC compression adjuster on:\u003c\/p\u003e\u003cul\u003e \u003cli\u003eFOX 34 with GRIP2 VVC, model year 2021–2024\u003c\/li\u003e \u003cli\u003eFOX 36 with GRIP2 VVC, model year 2021–2024\u003c\/li\u003e \u003cli\u003eFOX 38 with GRIP2 VVC, model year 2021–2024\u003c\/li\u003e \u003cli\u003eFOX 40 with GRIP2 VVC, model year 2021–2024\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eNot automatically compatible with GRIP2 cartridges without VVC, GRIP X, GRIP X2, FIT4, or other FOX adjusters. Check the cartridge generation and ball diameter before ordering.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth\u003eFeature\u003c\/th\u003e \u003cth\u003eSpecification\u003c\/th\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProduct type\u003c\/td\u003e \u003ctd\u003eCompatible detent\/click ball\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDiameter\u003c\/td\u003e \u003ctd\u003e2.381 mm\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eImperial size\u003c\/td\u003e \u003ctd\u003e3\/32″\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eMaterial\u003c\/td\u003e \u003ctd\u003eHardened steel\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eAccuracy class\u003c\/td\u003e \u003ctd\u003eG40\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eStandard\u003c\/td\u003e \u003ctd\u003eDIN 5401\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSurface\u003c\/td\u003e \u003ctd\u003eGround and polished\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eApplication site\u003c\/td\u003e \u003ctd\u003eHSC compression adjuster\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCompatible cartridge\u003c\/td\u003e \u003ctd\u003eFOX GRIP2 VVC 2021–2024\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eScope of delivery\u003c\/td\u003e \u003ctd\u003e2 steel balls\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eOriginal part\u003c\/td\u003e \u003ctd\u003eNo\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScope of Delivery\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003e2 click balls with 2.381 mm diameter\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eSprings, adjustment knobs, screws, lubricants, and tools are not included.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Note\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBoth ball\/spring sets must be fully and correctly installed. After installation, check that the HSC and LSC can move freely and that the click positions engage cleanly.\u003c\/p\u003e\u003cp\u003eWork on the damper cartridge should only be performed with the necessary technical knowledge and in accordance with FOX service specifications.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich ball size does the GRIP2 VVC click mechanism require?\u003c\/strong\u003e\u003cbr\u003eThe FOX parts diagram specifies a diameter of 0.0938″. This corresponds to the standard size 3\/32″ or 2.381 mm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the set contain two balls?\u003c\/strong\u003e\u003cbr\u003eFOX points out during assembly that both ball\/spring sets must be present in the HSC adjuster.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the small springs included as well?\u003c\/strong\u003e\u003cbr\u003eNo. The scope of delivery includes only two steel balls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre these original FOX spare parts?\u003c\/strong\u003e\u003cbr\u003eNo. These are compatible industrial steel balls of the correct size. FOX specifies Grade 25 for the original ball; the offered Brütsch\/Rüegger version is class G40.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the set also fit GRIP X or GRIP X2?\u003c\/strong\u003e\u003cbr\u003eCompatibility for these cartridges is not confirmed. This item should only be sold for the explicitly listed GRIP2 VVC applications.\u003c\/p\u003e","brand":"MTB-Raceshop","offers":[{"title":"Default Title","offer_id":58807876256118,"sku":"MTR-GRIP2-KUGEL-238-2","price":4.9,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/acd7ba_46e6e5acab89422ebc1dd4897a2c30d7_mv2.jpg?v=1790230153"},{"product_id":"skf-dual-compound-gabeldichtungen-40-mm-fox-40-marzocchi-bomber-58","title":"SKF Dual Compound Fork Seals 40 mm – FOX 40 \u0026 Marzocchi Bomber 58","description":"\u003cp\u003e\u003cstrong\u003eShort description\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SKF Dual Compound seal kit for FOX 40 suspension forks combines low friction with reliable protection against dirt and moisture. The optimised design supports sensitive response behaviour for demanding downhill and bike park use.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProduct description\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSKF Dual Compound fork seals for FOX 40\u003c\/p\u003e\u003cp\u003eFork seals must reliably protect the inside of the suspension fork from dust, mud, and moisture. At the same time, seal friction affects the fork's responsiveness.\u003c\/p\u003e\u003cp\u003eThe SKF Dual Compound fork seals consist of two bonded rubber compounds. SKF combines these with a revised geometry for the sealing and wiper lips. The result is a combination of reliable sealing and minimal possible friction.\u003c\/p\u003e\u003cp\u003eAn open-wound tension spring on the wiper lip supports even contact with the stanchion and prevents dirt from becoming trapped inside the spring. An integrated metal insert stabilises the seal and supports its function during demanding use.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdvantages of SKF Dual Compound seals\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003eTwo bonded rubber compounds\u003c\/li\u003e \u003cli\u003eLow friction for sensitive response behaviour\u003c\/li\u003e \u003cli\u003eOptimised sealing and wiper lips\u003c\/li\u003e \u003cli\u003eOpen-wound tension spring on the wiper lip\u003c\/li\u003e \u003cli\u003eReliable protection against dirt and moisture\u003c\/li\u003e \u003cli\u003eFor suspension forks with 40 mm stanchions\u003c\/li\u003e \u003cli\u003eFor demanding downhill and bike park use\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003eFOX 40 suspension forks with 40 mm stanchions\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003ePlease check the exact model and model year of your suspension fork before ordering. If you are unsure, compatibility should be verified using the fork designation or serial number.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScope of delivery\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003e2 SKF Dual Compound oil and dust wipers\u003c\/li\u003e \u003cli\u003e2 pre-impregnated foam rings\u003c\/li\u003e \u003cli\u003e2 crush washers\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you need for installation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOil and grease are not included. To fit the seals, you also need:\u003c\/p\u003e\u003cul\u003e \u003cli\u003e\n\u003ca href=\"\/en\/products\/fl01-lower-leg-lube\" title=\"WPS FL01 Lower Leg Lube – Lubricating oil for suspension forks\"\u003eWPS FL01 Lower Leg Lube\u003c\/a\u003e: lubricating oil for the lower legs\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"\/en\/products\/danico-biotech-race-grease?variant=58816462881142\" title=\"Danico Biotech Race Grease\"\u003eDanico Biotech Race Grease\u003c\/a\u003e: for greasing the seal lips\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"\/en\/products\/push-industries-fork-seal-installation-tool?variant=58816518521206\" title=\"PUSH Industries Fork Seal Installation Tool\"\u003ePUSH seal installation tool\u003c\/a\u003e in 40 mm: presses the seals in straight without damaging them\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe easiest way: add everything to your basket with the 'Complete set for your lower leg service' on this page. With oil, you get a set discount.\u003c\/p\u003e\u003cp\u003eRather leave it to us? We fit them for you as part of the \u003ca href=\"\/en\/products\/lower-leg-service-inkl-skf-dichtungen-40-mm-fox-40\" title=\"Lower leg service incl. SKF seals – 40 mm FOX 40\"\u003elower leg service incl. SKF seals\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth\u003eFeature\u003c\/th\u003e \u003cth\u003eSpecification\u003c\/th\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eManufacturer\u003c\/td\u003e \u003ctd\u003eSKF\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProduct series\u003c\/td\u003e \u003ctd\u003eDual Compound\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eIntended use\u003c\/td\u003e \u003ctd\u003eMTB, Downhill, Freeride, Bike park\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eStanchion diameter\u003c\/td\u003e \u003ctd\u003e40 mm\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSeal dimensions\u003c\/td\u003e \u003ctd\u003e40 × 50 × 8 mm\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eManufacturer part number\u003c\/td\u003e \u003ctd\u003eMTBDUAL-40FN\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eEAN\/GTIN\u003c\/td\u003e \u003ctd\u003e8050616065940\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCompatible brand\u003c\/td\u003e \u003ctd\u003eFOX\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eScope of delivery\u003c\/td\u003e \u003ctd\u003e \u003cul\u003e \u003cli\u003e2 SKF Dual Compound oil and dust wipers\u003c\/li\u003e \u003cli\u003e2 pre-impregnated foam rings\u003c\/li\u003e \u003cli\u003e2 crush washers\u003c\/li\u003e \u003c\/ul\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently asked questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does Dual Compound mean?\u003c\/strong\u003e\u003cbr\u003eIn this design, SKF bonds two different rubber compounds within the seal. This combines the requirements for sealing, durability, and low friction.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich suspension fork is this seal kit intended for?\u003c\/strong\u003e\u003cbr\u003eThe kit is intended for FOX 40 suspension forks with 40 mm stanchions. The exact model and model year should be checked before ordering.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo new fork seals improve responsiveness?\u003c\/strong\u003e\u003cbr\u003eWorn or dirty seals can increase friction. New, correctly installed, and lubricated seals support smooth movement of the stanchions.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install the seals myself?\u003c\/strong\u003e\u003cbr\u003eYes, if you can remove your fork's lower legs yourself. You'll need oil, grease and ideally a seal installation tool that matches your stanchion size (see 'What you need for installation'). Rather leave it to us? Book the \u003ca href=\"\/en\/products\/lower-leg-service-inkl-skf-dichtungen-40-mm-fox-40\" title=\"Lower leg service incl. SKF seals – 40 mm FOX 40\"\u003elower leg service incl. SKF seals\u003c\/a\u003e.\u003c\/p\u003e","brand":"SKF","offers":[{"title":"Default Title","offer_id":58807876845942,"sku":"MTBDUAL-40FN","price":33.8,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/acd7ba_7238bcc6a0304ed992cc462a06f650ae_mv2.webp?v=1790230159"},{"product_id":"skf-dual-compound-gabeldichtungen-35-mm-rockshox-pike-lyrik-yari-boxxer","title":"SKF Dual Compound Fork Seals 35 mm – RockShox Pike, Lyrik, Yari \u0026 BoXXer","description":"\u003cp\u003e\u003cstrong\u003eShort Description\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SKF Dual Compound seal kit for RockShox suspension forks with 35 mm stanchions combines low friction with reliable protection against dirt and moisture. Suitable for numerous RockShox Pike, Lyrik, Yari, Domain, and older BoXXer models.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSKF Dual Compound fork seals for RockShox 35 mm\u003c\/p\u003e\u003cp\u003eFork seals do more than just reliably keep dirt and moisture out of the suspension fork. Their friction also has a direct impact on the fork's responsiveness.\u003c\/p\u003e\u003cp\u003eThe SKF Dual Compound fork seals were developed using two bonded rubber compounds and an optimised geometry for the sealing and wiper lips. As a result, the seals follow the 35 mm stanchions reliably without generating unnecessarily high friction. This supports sensitive responsiveness while simultaneously protecting the interior of the suspension fork from contaminants.\u003c\/p\u003e\u003cp\u003eAn open tension spring on the wiper lip ensures uniform contact pressure and improves protection against dust, mud, and moisture. The redesigned metal insert stabilises the seal and ensures a secure fit in the lower legs.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdvantages of the SKF Dual Compound seals\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003eLow friction for sensitive responsiveness\u003c\/li\u003e \u003cli\u003eTwo combined rubber compounds for sealing effect and smooth operation\u003c\/li\u003e \u003cli\u003eOptimised sealing and wiper lips\u003c\/li\u003e \u003cli\u003eOpen tension spring on the wiper lip\u003c\/li\u003e \u003cli\u003eReliable protection against dirt and moisture\u003c\/li\u003e \u003cli\u003eDeveloped for trail, all-mountain, enduro, and downhill use\u003c\/li\u003e \u003cli\u003ePrecise fit for RockShox forks with 35 mm stanchions\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe seal kit is suitable for the following RockShox suspension forks, among others:\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRockShox Pike\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003ePike RC from 2014 to 2019\u003c\/li\u003e \u003cli\u003ePike RCT3 from 2014 to 2019\u003c\/li\u003e \u003cli\u003ePike Select, Select+, and Ultimate from 2020 to 2022\u003c\/li\u003e \u003cli\u003ePike C1 from model year 2023\u003c\/li\u003e \u003cli\u003ePike DJ from model year 2016\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRockShox Lyrik\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003eLyrik RC from 2010 to 2019\u003c\/li\u003e \u003cli\u003eLyrik RC2 DH from 2010 to 2019\u003c\/li\u003e \u003cli\u003eLyrik RCT3 from 2016 to 2019\u003c\/li\u003e \u003cli\u003eLyrik Select and Ultimate from 2020 to 2022\u003c\/li\u003e \u003cli\u003eLyrik D1 and newer 35 mm versions from model year 2023\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOther RockShox models\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003eYari RC from 2016 to 2022\u003c\/li\u003e \u003cli\u003eDomain Dual Crown RC from 2007 to 2016\u003c\/li\u003e \u003cli\u003eBoXXer RC, Team, and World Cup with 35 mm stanchions\u003c\/li\u003e \u003cli\u003eBoXXer C1 model year 2019\u003c\/li\u003e \u003cli\u003eBoXXer Select and Ultimate C2 from 2020 to 2023\u003c\/li\u003e \u003cli\u003eRockShox 35 Gold and Silver with 35 mm stanchions\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e The current RockShox BoXXer from model year 2024 has 38 mm stanchions and is not compatible. A 38 mm seal kit is also required for the RockShox ZEB.\u003c\/p\u003e\u003cp\u003ePlease check the exact model name, generation, and stanchion diameter of your suspension fork before ordering.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScope of Delivery\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003e2 SKF Dual Compound oil and dust wipers\u003c\/li\u003e \u003cli\u003e2 foam rings\u003c\/li\u003e \u003cli\u003e2 crush washers\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eScope of delivery for servicing one suspension fork.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you need for installation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOil and grease are not included. To fit the seals, you also need:\u003c\/p\u003e\u003cul\u003e \u003cli\u003e\n\u003ca href=\"\/en\/products\/fl01-lower-leg-lube\" title=\"WPS FL01 Lower Leg Lube – Lubricating oil for suspension forks\"\u003eWPS FL01 Lower Leg Lube\u003c\/a\u003e: lubricating oil for the lower legs\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"\/en\/products\/danico-biotech-race-grease?variant=58816462881142\" title=\"Danico Biotech Race Grease\"\u003eDanico Biotech Race Grease\u003c\/a\u003e: for greasing the seal lips\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"\/en\/products\/push-industries-fork-seal-installation-tool?variant=58816518422902\" title=\"PUSH Industries Fork Seal Installation Tool\"\u003ePUSH seal installation tool\u003c\/a\u003e in 35 mm: presses the seals in straight without damaging them\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe easiest way: add everything to your basket with the 'Complete set for your lower leg service' on this page. With oil, you get a set discount.\u003c\/p\u003e\u003cp\u003eRather leave it to us? We fit them for you as part of the \u003ca href=\"\/en\/products\/lower-leg-service-inkl-skf-dichtungen-35-mm-rockshox-pike-lyrik\" title=\"Lower leg service incl. SKF seals – 35 mm RockShox Pike \u0026amp; Lyrik\"\u003elower leg service incl. SKF seals\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth\u003eFeature\u003c\/th\u003e \u003cth\u003eDetails\u003c\/th\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eManufacturer\u003c\/td\u003e \u003ctd\u003eSKF\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProduct series\u003c\/td\u003e \u003ctd\u003eDual Compound\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eIntended use\u003c\/td\u003e \u003ctd\u003eMTB, Trail, All-Mountain, Enduro, Downhill\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eStanchion diameter\u003c\/td\u003e \u003ctd\u003e35 mm\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSeal dimensions\u003c\/td\u003e \u003ctd\u003e35 × 45 × 8.3 mm\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eManufacturer part number\u003c\/td\u003e \u003ctd\u003eMTBDUAL-35RN\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eEAN\/GTIN\u003c\/td\u003e \u003ctd\u003e8050616065902\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCompatible brand\u003c\/td\u003e \u003ctd\u003eRockShox\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eScope of delivery\u003c\/td\u003e \u003ctd\u003e2 seals, 2 foam rings, 2 crush washers\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does Dual Compound mean?\u003c\/strong\u003e\u003cbr\u003eSKF combines two different rubber compounds within the seal. This allows for the targeted combination of low friction and reliable sealing.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the seals fit every RockShox fork with 35 mm stanchions?\u003c\/strong\u003e\u003cbr\u003eThe kit is designed for numerous RockShox models with 35 mm stanchions. Nevertheless, the model, generation, and year of manufacture should be checked before ordering.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit fit RockShox Pike and Lyrik?\u003c\/strong\u003e\u003cbr\u003eYes, it is compatible with numerous Pike and Lyrik generations with 35 mm stanchions. The exact model years are listed in the compatibility list.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit fit the current RockShox BoXXer?\u003c\/strong\u003e\u003cbr\u003eNo. The BoXXer from model year 2024 has 38 mm stanchions. This kit only fits older BoXXer generations with 35 mm stanchions.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit fit the RockShox ZEB?\u003c\/strong\u003e\u003cbr\u003eNo. The ZEB has 38 mm stanchions and requires the SKF seal kit MTBDUAL-38FRN.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install the seals myself?\u003c\/strong\u003e\u003cbr\u003eYes, if you can remove your fork's lower legs yourself. You'll need oil, grease and ideally a seal installation tool that matches your stanchion size (see 'What you need for installation'). Rather leave it to us? Book the \u003ca href=\"\/en\/products\/lower-leg-service-inkl-skf-dichtungen-35-mm-rockshox-pike-lyrik\" title=\"Lower leg service incl. SKF seals – 35 mm RockShox Pike \u0026amp; Lyrik\"\u003elower leg service incl. SKF seals\u003c\/a\u003e.\u003c\/p\u003e","brand":"SKF","offers":[{"title":"Default Title","offer_id":58807876878710,"sku":"MTBDUAL-35RN","price":33.8,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/acd7ba_7238bcc6a0304ed992cc462a06f650ae_mv2_4bbcbda0-0f0e-476e-a385-f27b630438b3.webp?v=1790230159"},{"product_id":"skf-dual-compound-gabeldichtungen-32-mm-rockshox-sid-reba-rs-1-weitere","title":"SKF Dual Compound Fork Seals 32 mm – RockShox SID, Reba, RS-1 \u0026 others","description":"\u003cp\u003e\u003cstrong\u003eShort Description\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SKF Dual Compound seal kit for select RockShox suspension forks with 32 mm stanchions combines low friction with reliable protection against dirt and moisture. Compatible with numerous models such as RockShox SID, Reba, RS-1, Sektor, and Bluto.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSKF Dual Compound Fork Seals for RockShox 32 mm\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFork seals not only influence how reliably dirt and moisture are kept out of the suspension fork; their friction also directly affects the fork's responsiveness.\u003c\/p\u003e\u003cp\u003eThe SKF Dual Compound fork seals were developed using two bonded rubber compounds and an optimised geometry of the sealing and wiper lips. As a result, the seals reliably follow the 32 mm stanchions without generating unnecessarily high friction. This supports a sensitive response while simultaneously protecting the inside of the suspension fork from contamination.\u003c\/p\u003e\u003cp\u003eAn open tension spring on the wiper lip ensures uniform contact pressure and improves protection against dust, mud, and moisture. The redesigned metal insert stabilises the seal and ensures a secure fit in the casting.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdvantages of SKF Dual Compound Seals\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003eLow friction for sensitive response\u003c\/li\u003e \u003cli\u003eTwo combined rubber compounds for sealing effectiveness and smooth operation\u003c\/li\u003e \u003cli\u003eOptimised sealing and wiper lips\u003c\/li\u003e \u003cli\u003eOpen tension spring on the wiper lip\u003c\/li\u003e \u003cli\u003eReliable protection against dirt and moisture\u003c\/li\u003e \u003cli\u003eDeveloped for cross-country, marathon, and trail use\u003c\/li\u003e \u003cli\u003ePrecision-fit design for select RockShox forks with 32 mm stanchions\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe seal kit is suitable for the following RockShox suspension forks:\u003c\/p\u003e\u003cul\u003e \u003cli\u003eRockShox Bluto from 2015 to 2018\u003c\/li\u003e \u003cli\u003eRockShox Reba RL model year 2018\u003c\/li\u003e \u003cli\u003eRockShox Reba RTL model year 2018\u003c\/li\u003e \u003cli\u003eRockShox Revelation RL from 2018 to 2023\u003c\/li\u003e \u003cli\u003eRockShox RS-1 from 2015 to 2023\u003c\/li\u003e \u003cli\u003eRockShox Sektor RL C1 from 2019 to 2023\u003c\/li\u003e \u003cli\u003eRockShox Sektor Silver from 2017 to 2023\u003c\/li\u003e \u003cli\u003eRockShox SID B A1–A4 with 80–120 mm travel from 2011 to 2016\u003c\/li\u003e \u003cli\u003eRockShox SID RCT3 from 2017 to 2023\u003c\/li\u003e \u003cli\u003eRockShox SID SL Select 32 mm from 2021 onwards\u003c\/li\u003e \u003cli\u003eRockShox SID SL Ultimate 32 mm from 2021 onwards\u003c\/li\u003e \u003cli\u003eRockShox SID XX from 2017 to 2023\u003c\/li\u003e \u003cli\u003eRockShox SID XX World Cup from 2017 to 2023\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003ePlease check the exact model name and model year of your suspension fork before ordering. Not every RockShox fork with 32 mm stanchions uses the same seal dimensions.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScope of Delivery\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003e2 SKF Dual Compound oil and dust wipers\u003c\/li\u003e \u003cli\u003e2 pre-impregnated foam rings\u003c\/li\u003e \u003cli\u003e2 crush washers\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you need for installation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOil and grease are not included. To fit the seals, you also need:\u003c\/p\u003e\u003cul\u003e \u003cli\u003e\n\u003ca href=\"\/en\/products\/fl01-lower-leg-lube\" title=\"WPS FL01 Lower Leg Lube – Lubricating oil for suspension forks\"\u003eWPS FL01 Lower Leg Lube\u003c\/a\u003e: lubricating oil for the lower legs\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"\/en\/products\/danico-biotech-race-grease?variant=58816462881142\" title=\"Danico Biotech Race Grease\"\u003eDanico Biotech Race Grease\u003c\/a\u003e: for greasing the seal lips\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"\/en\/products\/push-industries-fork-seal-installation-tool?variant=58816518357366\" title=\"PUSH Industries Fork Seal Installation Tool\"\u003ePUSH seal installation tool\u003c\/a\u003e in 32 mm: presses the seals in straight without damaging them\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe easiest way: add everything to your basket with the 'Complete set for your lower leg service' on this page. With oil, you get a set discount.\u003c\/p\u003e\u003cp\u003eRather leave it to us? We fit them for you as part of the \u003ca href=\"\/en\/products\/lower-leg-service-inkl-skf-dichtungen-32-mm-rockshox-sid-reba\" title=\"Lower leg service incl. SKF seals – 32 mm RockShox SID \u0026amp; Reba\"\u003elower leg service incl. SKF seals\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTechnical Data\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth\u003eFeature\u003c\/th\u003e \u003cth\u003eSpecification\u003c\/th\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eManufacturer\u003c\/td\u003e \u003ctd\u003eSKF\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProduct Series\u003c\/td\u003e \u003ctd\u003eDual Compound\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eIntended Use\u003c\/td\u003e \u003ctd\u003eMTB, Cross-Country, Marathon, Trail\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eStanchion Diameter\u003c\/td\u003e \u003ctd\u003e32 mm\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSeal Dimensions\u003c\/td\u003e \u003ctd\u003e32 × 41 × 8 mm\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eManufacturer Part Number\u003c\/td\u003e \u003ctd\u003eMTBDUAL-32RN\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eEAN\/GTIN\u003c\/td\u003e \u003ctd\u003e8050616065865\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCompatible Brand\u003c\/td\u003e \u003ctd\u003eRockShox\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eScope of Delivery\u003c\/td\u003e \u003ctd\u003e \u003cul\u003e \u003cli\u003e2 SKF Dual Compound oil and dust wipers\u003c\/li\u003e \u003cli\u003e2 pre-impregnated foam rings\u003c\/li\u003e \u003cli\u003e2 crush washers\u003c\/li\u003e \u003c\/ul\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does Dual Compound mean?\u003c\/strong\u003e\u003cbr\u003eSKF combines two different rubber compounds within the seal. This allows low friction and reliable sealing to be combined in a targeted manner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the seals fit every RockShox fork with 32 mm stanchions?\u003c\/strong\u003e\u003cbr\u003eNo. RockShox has used different seal dimensions and designs. Therefore, the exact fork model and model year must match the compatibility list.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit fit a current RockShox SID with 35 mm stanchions?\u003c\/strong\u003e\u003cbr\u003eNo. This seal kit is exclusively intended for compatible RockShox forks with 32 mm stanchions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit also fit FOX 32 suspension forks?\u003c\/strong\u003e\u003cbr\u003eNo. For FOX 32 models, the separate SKF seal kit with part number MTBDUAL-32FN is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install the seals myself?\u003c\/strong\u003e\u003cbr\u003eYes, if you can remove your fork's lower legs yourself. You'll need oil, grease and ideally a seal installation tool that matches your stanchion size (see 'What you need for installation'). Rather leave it to us? Book the \u003ca href=\"\/en\/products\/lower-leg-service-inkl-skf-dichtungen-32-mm-rockshox-sid-reba\" title=\"Lower leg service incl. SKF seals – 32 mm RockShox SID \u0026amp; Reba\"\u003elower leg service incl. SKF seals\u003c\/a\u003e.\u003c\/p\u003e","brand":"SKF","offers":[{"title":"Default Title","offer_id":58807877075318,"sku":"MTBDUAL-32RN","price":33.8,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/acd7ba_7238bcc6a0304ed992cc462a06f650ae_mv2_d544f62d-2641-4e45-9890-2d1c3fb7826b.webp?v=1790230161"},{"product_id":"skf-dual-compound-gabeldichtungen-32-mm-fox-32-ab-2016","title":"SKF Dual Compound Fork Seals 32 mm – FOX 32 from 2016","description":"\u003cp\u003e\u003cstrong\u003eShort Description\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SKF Dual Compound seal kit for FOX 32 suspension forks combines low friction with reliable protection against dirt and moisture. The optimised sealing and wiper lips support sensitive response and long-lasting, clean performance of the suspension fork.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSKF Dual Compound Fork Seals for FOX 32\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFork seals not only influence how reliably dirt and moisture are kept out of the suspension fork; their friction also has a direct effect on the fork's response.\u003c\/p\u003e\u003cp\u003eThe SKF Dual Compound fork seals were developed using two bonded rubber compounds and an optimised geometry for the sealing and wiper lips. As a result, the seals follow the 32 mm stanchions reliably without generating unnecessarily high friction. This supports a sensitive response while protecting the inside of the suspension fork from contamination.\u003c\/p\u003e\u003cp\u003eAn open tension spring on the wiper lip ensures uniform contact pressure and improves protection against dust, mud, and moisture. The revised metal insert stabilises the seal and ensures a secure fit in the casting.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdvantages of SKF Dual Compound Seals\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003eLow friction for sensitive response\u003c\/li\u003e \u003cli\u003eTwo combined rubber compounds for sealing effect and smooth operation\u003c\/li\u003e \u003cli\u003eOptimised sealing and wiper lips\u003c\/li\u003e \u003cli\u003eOpen tension spring on the wiper lip\u003c\/li\u003e \u003cli\u003eReliable protection against dirt and moisture\u003c\/li\u003e \u003cli\u003eDeveloped for cross-country, marathon, and light trail use\u003c\/li\u003e \u003cli\u003eCustom-fit design for current FOX 32 suspension forks\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe seal kit is suitable for the following suspension forks:\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFOX\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003eFOX 32 – all models from model year 2016\u003c\/li\u003e \u003cli\u003eFOX 32 Step-Cast from model year 2016\u003c\/li\u003e \u003cli\u003eFOX 32 XC Factory from model year 2016\u003c\/li\u003e \u003cli\u003eFOX 32 XC Performance from model year 2016\u003c\/li\u003e \u003cli\u003eFOX 32 AX Adventure Cross from model year 2020\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eNot suitable for older FOX 32 suspension forks before model year 2016. A different SKF seal kit is required for these versions.\u003c\/p\u003e\u003cp\u003ePlease check the exact model and model year of your suspension fork before ordering. The stanchion diameter alone does not guarantee compatibility.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScope of Delivery\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003e2 SKF Dual Compound oil and dust wipers\u003c\/li\u003e \u003cli\u003e2 pre-impregnated foam rings\u003c\/li\u003e \u003cli\u003e2 crush washers\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you need for installation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOil and grease are not included. To fit the seals, you also need:\u003c\/p\u003e\u003cul\u003e \u003cli\u003e\n\u003ca href=\"\/en\/products\/fl01-lower-leg-lube\" title=\"WPS FL01 Lower Leg Lube – Lubricating oil for suspension forks\"\u003eWPS FL01 Lower Leg Lube\u003c\/a\u003e: lubricating oil for the lower legs\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"\/en\/products\/danico-biotech-race-grease?variant=58816462881142\" title=\"Danico Biotech Race Grease\"\u003eDanico Biotech Race Grease\u003c\/a\u003e: for greasing the seal lips\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"\/en\/products\/push-industries-fork-seal-installation-tool?variant=58816518357366\" title=\"PUSH Industries Fork Seal Installation Tool\"\u003ePUSH seal installation tool\u003c\/a\u003e in 32 mm: presses the seals in straight without damaging them\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe easiest way: add everything to your basket with the 'Complete set for your lower leg service' on this page. With oil, you get a set discount.\u003c\/p\u003e\u003cp\u003eRather leave it to us? We fit them for you as part of the \u003ca href=\"\/en\/products\/lower-leg-service-inkl-skf-dichtungen-32-mm-fox-32\" title=\"Lower leg service incl. SKF seals – 32 mm FOX 32\"\u003elower leg service incl. SKF seals\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTechnical Data\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth\u003eFeature\u003c\/th\u003e \u003cth\u003eSpecification\u003c\/th\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eManufacturer\u003c\/td\u003e \u003ctd\u003eSKF\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProduct series\u003c\/td\u003e \u003ctd\u003eDual Compound\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eArea of use\u003c\/td\u003e \u003ctd\u003eMTB, Cross-Country, Marathon, Gravel\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eStanchion diameter\u003c\/td\u003e \u003ctd\u003e32 mm\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSeal dimensions\u003c\/td\u003e \u003ctd\u003e32 × 42 × 7.5\/12.5 mm\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eManufacturer part number\u003c\/td\u003e \u003ctd\u003eMTBDUAL-32FN\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eEAN\/GTIN\u003c\/td\u003e \u003ctd\u003e8050616066008\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCompatible brand\u003c\/td\u003e \u003ctd\u003eFOX\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCompatible models\u003c\/td\u003e \u003ctd\u003eFOX 32 from 2016\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eScope of delivery\u003c\/td\u003e \u003ctd\u003e \u003cul\u003e \u003cli\u003e2 SKF Dual Compound oil and dust wipers\u003c\/li\u003e \u003cli\u003e2 pre-impregnated foam rings\u003c\/li\u003e \u003cli\u003e2 crush washers\u003c\/li\u003e \u003c\/ul\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does Dual Compound mean?\u003c\/strong\u003e\u003cbr\u003eSKF combines two different rubber compounds within the seal. This allows low friction and reliable sealing to be effectively combined.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the seals fit every FOX 32?\u003c\/strong\u003e\u003cbr\u003eThe kit is intended for FOX 32 suspension forks from model year 2016 onwards. A different version is required for models up to and including 2015.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the FOX 32 Step-Cast compatible?\u003c\/strong\u003e\u003cbr\u003eYes, FOX 32 Step-Cast models from 2016 are covered by the intended application of this seal kit.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the kit also fit the FOX 32 AX?\u003c\/strong\u003e\u003cbr\u003eYes, the FOX 32 AX Adventure Cross from model year 2020 is compatible.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the seal kit fit RockShox forks with 32 mm stanchions?\u003c\/strong\u003e\u003cbr\u003eNo. For RockShox forks, the separate SKF Dual Compound seal kit with the part number MTBDUAL-32RN is required.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install the seals myself?\u003c\/strong\u003e\u003cbr\u003eYes, if you can remove your fork's lower legs yourself. You'll need oil, grease and ideally a seal installation tool that matches your stanchion size (see 'What you need for installation'). Rather leave it to us? Book the \u003ca href=\"\/en\/products\/lower-leg-service-inkl-skf-dichtungen-32-mm-fox-32\" title=\"Lower leg service incl. SKF seals – 32 mm FOX 32\"\u003elower leg service incl. SKF seals\u003c\/a\u003e.\u003c\/p\u003e","brand":"SKF","offers":[{"title":"Default Title","offer_id":58807877108086,"sku":"MTBDUAL-32FN","price":33.8,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/acd7ba_7238bcc6a0304ed992cc462a06f650ae_mv2_cebea57c-ea47-4bcc-9058-20dea9f4785f.webp?v=1790230162"},{"product_id":"skf-dual-compound-gabeldichtungen-36-mm-fox-36-marzocchi-bomber-z1","title":"SKF Dual Compound Fork Seals 36 mm – FOX 36 \u0026 Marzocchi Bomber Z1","description":"\u003cp\u003e\u003cstrong\u003eShort Description\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SKF Dual Compound seal kit for FOX 36 and Marzocchi Bomber Z1 combines low friction with reliable protection against dirt and moisture. The optimised sealing and scraper lips support sensitive responsiveness and long-lasting, clean performance of the suspension fork.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSKF Dual Compound fork seals for FOX 36\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eFork seals do more than just reliably keep dirt and moisture out of the suspension fork. Their friction also directly affects the fork's responsiveness.\u003c\/p\u003e\u003cp\u003eSKF Dual Compound fork seals were developed using two bonded rubber compounds and an optimised geometry for the sealing and scraper lips. As a result, the seals reliably follow the 36 mm stanchions without generating excessively high friction. This supports sensitive responsiveness while simultaneously protecting the inside of the suspension fork from contamination.\u003c\/p\u003e\u003cp\u003eAn open tension spring on the scraper lip ensures uniform contact pressure and improves protection against dust, mud, and moisture. The revised metal insert stabilises the seal and ensures a secure fit in the lower legs.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBenefits of SKF Dual Compound seals\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003eLow friction for sensitive responsiveness\u003c\/li\u003e \u003cli\u003eTwo combined rubber compounds for sealing effect and smooth operation\u003c\/li\u003e \u003cli\u003eOptimised sealing and scraper lips\u003c\/li\u003e \u003cli\u003eOpen tension spring on the scraper lip\u003c\/li\u003e \u003cli\u003eReliable protection against dirt and moisture\u003c\/li\u003e \u003cli\u003eDeveloped for demanding All-Mountain, Enduro, and E-MTB use\u003c\/li\u003e \u003cli\u003ePrecisely fitted design for FOX 36 and Marzocchi Bomber Z1\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe seal kit is suitable for the following suspension forks:\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFOX\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003eFOX 36 – all models from 2015 to 2023\u003c\/li\u003e \u003cli\u003eFOX 36 All Mountain Factory from 2015 to 2023\u003c\/li\u003e \u003cli\u003eFOX 36 Factory from 2020 to 2023\u003c\/li\u003e \u003cli\u003eFOX 36 Performance Elite from 2020 to 2023\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMarzocchi\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003eMarzocchi Bomber Z1 from 2019 to 2023\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003ePlease check the exact model and model year of your suspension fork before ordering. Stanchion diameter alone does not guarantee compatibility.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScope of Delivery\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003e2 SKF Dual Compound oil and dust wipers\u003c\/li\u003e \u003cli\u003e2 pre-impregnated foam rings\u003c\/li\u003e \u003cli\u003e2 crush washers\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you need for installation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOil and grease are not included. To fit the seals, you also need:\u003c\/p\u003e\u003cul\u003e \u003cli\u003e\n\u003ca href=\"\/en\/products\/fl01-lower-leg-lube\" title=\"WPS FL01 Lower Leg Lube – Lubricating oil for suspension forks\"\u003eWPS FL01 Lower Leg Lube\u003c\/a\u003e: lubricating oil for the lower legs\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"\/en\/products\/danico-biotech-race-grease?variant=58816462881142\" title=\"Danico Biotech Race Grease\"\u003eDanico Biotech Race Grease\u003c\/a\u003e: for greasing the seal lips\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"\/en\/products\/push-industries-fork-seal-installation-tool?variant=58816518455670\" title=\"PUSH Industries Fork Seal Installation Tool\"\u003ePUSH seal installation tool\u003c\/a\u003e in 36 mm: presses the seals in straight without damaging them\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe easiest way: add everything to your basket with the 'Complete set for your lower leg service' on this page. With oil, you get a set discount.\u003c\/p\u003e\u003cp\u003eRather leave it to us? We fit them for you as part of the \u003ca href=\"\/en\/products\/lower-leg-service-inkl-skf-dichtungen-36-mm-fox-36-bomber-z1\" title=\"Lower leg service incl. SKF seals – 36 mm FOX 36 \u0026amp; Bomber Z1\"\u003elower leg service incl. SKF seals\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTechnical Data\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth\u003eFeature\u003c\/th\u003e \u003cth\u003eSpecification\u003c\/th\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eManufacturer\u003c\/td\u003e \u003ctd\u003eSKF\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProduct series\u003c\/td\u003e \u003ctd\u003eDual Compound\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eApplication\u003c\/td\u003e \u003ctd\u003eMTB, All-Mountain, Enduro, E-MTB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eStanchion diameter\u003c\/td\u003e \u003ctd\u003e36 mm\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSeal dimensions\u003c\/td\u003e \u003ctd\u003e36 × 46 × 8 mm\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eManufacturer part number\u003c\/td\u003e \u003ctd\u003eMTBDUAL-36FN\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eEAN\/GTIN\u003c\/td\u003e \u003ctd\u003e8050616065889\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCompatible brands\u003c\/td\u003e \u003ctd\u003eFOX and Marzocchi\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCompatible models\u003c\/td\u003e \u003ctd\u003eFOX 36 and Marzocchi Bomber Z1\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eScope of delivery\u003c\/td\u003e \u003ctd\u003e \u003cul\u003e \u003cli\u003e2 SKF Dual Compound oil and dust wipers\u003c\/li\u003e \u003cli\u003e2 pre-impregnated foam rings\u003c\/li\u003e \u003cli\u003e2 crush washers\u003c\/li\u003e \u003c\/ul\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does Dual Compound mean?\u003c\/strong\u003e\u003cbr\u003eSKF combines two different rubber compounds within the seal. This allows for the targeted combination of low friction and reliable sealing.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the seals fit every FOX 36?\u003c\/strong\u003e\u003cbr\u003eAccording to the application list, the kit is intended for FOX 36 models from the 2015 to 2023 model years. For newer or older forks, compatibility should be checked before ordering.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the seals also fit the Marzocchi Bomber Z1?\u003c\/strong\u003e\u003cbr\u003eYes, the kit is suitable for the Marzocchi Bomber Z1 from the 2019 to 2023 model years.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre foam rings included?\u003c\/strong\u003e\u003cbr\u003eYes. In addition to the two SKF Dual Compound fork seals, the set also includes 2 pre-impregnated foam rings and 2 crush washers. Oil and grease are not included; you'll find suitable ones under 'What you need for installation'.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install the seals myself?\u003c\/strong\u003e\u003cbr\u003eYes, if you can remove your fork's lower legs yourself. You'll need oil, grease and ideally a seal installation tool that matches your stanchion size (see 'What you need for installation'). Rather leave it to us? Book the \u003ca href=\"\/en\/products\/lower-leg-service-inkl-skf-dichtungen-36-mm-fox-36-bomber-z1\" title=\"Lower leg service incl. SKF seals – 36 mm FOX 36 \u0026amp; Bomber Z1\"\u003elower leg service incl. SKF seals\u003c\/a\u003e.\u003c\/p\u003e","brand":"SKF","offers":[{"title":"Default Title","offer_id":58807877402998,"sku":"MTBDUAL-36FN","price":33.8,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/acd7ba_7238bcc6a0304ed992cc462a06f650ae_mv2_d8aa51fb-47ee-478e-a8f5-209f7ecfacd5.webp?v=1790230166"},{"product_id":"skf-dual-compound-gabeldichtungen-34mm-fox-34","title":"SKF Dual Compound Fork Seals 34 mm – FOX 34 from 2016","description":"\u003cp\u003e\u003cstrong\u003eShort description\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SKF Dual Compound seal kit for FOX 34 suspension forks combines low friction with reliable protection against dirt and moisture. The optimised sealing and wiper lips support sensitive responsiveness and long-lasting, clean fork performance.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProduct description\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSKF Dual Compound fork seals for FOX 34\u003c\/p\u003e\u003cp\u003eFork seals not only influence how reliably dirt and moisture are kept out of the suspension fork. Their friction also has a direct impact on the fork's responsiveness.\u003c\/p\u003e\u003cp\u003eThe SKF Dual Compound fork seals have been developed with two bonded rubber compounds and an optimised geometry of the sealing and wiper lips. This allows the seals to follow the 34 mm stanchions reliably without creating unnecessarily high friction. This supports sensitive responsiveness while protecting the interior of the suspension fork from contamination.\u003c\/p\u003e\u003cp\u003eAn open tension spring on the wiper lip ensures uniform contact pressure and improves protection against dust, mud, and moisture. The redesigned metal insert stabilises the seal and ensures a secure fit in the casting.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdvantages of SKF Dual Compound seals\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003eLow friction for sensitive responsiveness\u003c\/li\u003e \u003cli\u003eTwo combined rubber compounds for sealing effect and smooth movement\u003c\/li\u003e \u003cli\u003eOptimised sealing and wiper lips\u003c\/li\u003e \u003cli\u003eOpen tension spring on the wiper lip\u003c\/li\u003e \u003cli\u003eReliable protection against dirt and moisture\u003c\/li\u003e \u003cli\u003eDeveloped for demanding trail, all-mountain, and e-MTB use\u003c\/li\u003e \u003cli\u003ePrecision fit for FOX 34 suspension forks\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe seal kit is suitable for the following suspension forks:\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFOX\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003eFOX 34 – all models from 2016 to 2023\u003c\/li\u003e \u003cli\u003eFOX 34 Trail Factory from 2016 to 2023\u003c\/li\u003e \u003cli\u003eFOX 34 Trail Performance from 2016 to 2023\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003ePlease check the exact model and model year of your suspension fork before ordering. The stanchion diameter alone does not guarantee compatibility.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScope of delivery\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003e2 SKF Dual Compound oil and dust wipers\u003c\/li\u003e \u003cli\u003e2 pre-impregnated foam rings\u003c\/li\u003e \u003cli\u003e2 crush washers\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you need for installation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOil and grease are not included. To fit the seals, you also need:\u003c\/p\u003e\u003cul\u003e \u003cli\u003e\n\u003ca href=\"\/en\/products\/fl01-lower-leg-lube\" title=\"WPS FL01 Lower Leg Lube – Lubricating oil for suspension forks\"\u003eWPS FL01 Lower Leg Lube\u003c\/a\u003e: lubricating oil for the lower legs\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"\/en\/products\/danico-biotech-race-grease?variant=58816462881142\" title=\"Danico Biotech Race Grease\"\u003eDanico Biotech Race Grease\u003c\/a\u003e: for greasing the seal lips\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"\/en\/products\/push-industries-fork-seal-installation-tool?variant=58816518390134\" title=\"PUSH Industries Fork Seal Installation Tool\"\u003ePUSH seal installation tool\u003c\/a\u003e in 34 mm: presses the seals in straight without damaging them\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe easiest way: add everything to your basket with the 'Complete set for your lower leg service' on this page. With oil, you get a set discount.\u003c\/p\u003e\u003cp\u003eRather leave it to us? We fit them for you as part of the \u003ca href=\"\/en\/products\/lower-leg-service-inkl-skf-dichtungen-34-mm-fox-34\" title=\"Lower leg service incl. SKF seals – 34 mm FOX 34\"\u003elower leg service incl. SKF seals\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth\u003eFeature\u003c\/th\u003e \u003cth\u003eSpecification\u003c\/th\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eManufacturer\u003c\/td\u003e \u003ctd\u003eSKF\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProduct series\u003c\/td\u003e \u003ctd\u003eDual Compound\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eIntended use\u003c\/td\u003e \u003ctd\u003eMTB, Trail, All-Mountain, E-MTB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eStanchion diameter\u003c\/td\u003e \u003ctd\u003e34 mm\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eManufacturer part number\u003c\/td\u003e \u003ctd\u003eMTBDUAL-34FN\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eEAN\/GTIN\u003c\/td\u003e \u003ctd\u003e8050616065926\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCompatible brand\u003c\/td\u003e \u003ctd\u003eFOX\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCompatible models\u003c\/td\u003e \u003ctd\u003eFOX 34\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eModel years\u003c\/td\u003e \u003ctd\u003e2016–2023\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eScope of delivery\u003c\/td\u003e \u003ctd\u003e \u003cul\u003e \u003cli\u003e2 SKF Dual Compound oil and dust wipers\u003c\/li\u003e \u003cli\u003e2 pre-impregnated foam rings\u003c\/li\u003e \u003cli\u003e2 crush washers\u003c\/li\u003e \u003c\/ul\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently asked questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does Dual Compound mean?\u003c\/strong\u003e\u003cbr\u003eSKF combines two different rubber compounds within the seal. This allows for the targeted combination of low friction and reliable sealing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the seals fit every FOX 34?\u003c\/strong\u003e\u003cbr\u003eAccording to the application list, the kit is intended for FOX 34 models from the 2016 to 2023 model years. For newer or older forks, compatibility should be checked before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre foam rings included?\u003c\/strong\u003e\u003cbr\u003eYes. In addition to the two SKF Dual Compound fork seals, the set includes 2 pre-impregnated foam rings and 2 crush washers. Oil and grease are not included; you'll find suitable ones under 'What you need for installation'.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install the seals myself?\u003c\/strong\u003e\u003cbr\u003eYes, if you can remove your fork's lower legs yourself. You'll need oil, grease and ideally a seal installation tool that matches your stanchion size (see 'What you need for installation'). Rather leave it to us? Book the \u003ca href=\"\/en\/products\/lower-leg-service-inkl-skf-dichtungen-34-mm-fox-34\" title=\"Lower leg service incl. SKF seals – 34 mm FOX 34\"\u003elower leg service incl. SKF seals\u003c\/a\u003e.\u003c\/p\u003e","brand":"SKF","offers":[{"title":"Default Title","offer_id":58807877435766,"sku":"MTBDUAL-34FN","price":33.8,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/acd7ba_7238bcc6a0304ed992cc462a06f650ae_mv2_6637a1c3-c296-415d-83f1-6aed270dcff6.webp?v=1790230167"},{"product_id":"skf-mountainbike-dual-gabel-dichtungskit-fox-rockshox-38mm","title":"SKF Dual Compound Fork Seals 38 mm – FOX 38, RockShox ZEB, Domain \u0026 BoXXer","description":"\u003cp\u003e\u003cstrong\u003eShort description\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SKF Dual Compound seal kit for MTB suspension forks with 38 mm stanchions combines low friction with reliable protection against dirt and moisture. Suitable for FOX 38 as well as selected RockShox ZEB, Domain and BoXXer models.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProduct description\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSKF Dual Compound fork seals for 38 mm suspension forks\u003c\/p\u003e\u003cp\u003eFork seals do not just influence how reliably dirt and moisture are kept out of the suspension fork. Their friction also has a direct effect on the fork's responsiveness.\u003c\/p\u003e\u003cp\u003eThe SKF Dual Compound fork seals were developed with two bonded rubber compounds and an optimised geometry of the sealing and wiper lips. As a result, the seals reliably follow the stanchions without creating unnecessarily high friction. This supports a sensitive response while protecting the inside of the suspension fork from contamination.\u003c\/p\u003e\u003cp\u003eAn open tension spring on the wiper lip ensures uniform contact pressure and improves protection against dust, mud and moisture. The revised metal insert stabilises the seal and ensures a secure fit in the casting.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdvantages of the SKF Dual Compound seals\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003eLow friction for sensitive response\u003c\/li\u003e \u003cli\u003eTwo combined rubber compounds for sealing effect and smooth operation\u003c\/li\u003e \u003cli\u003eOptimised sealing and wiper lips\u003c\/li\u003e \u003cli\u003eOpen tension spring on the wiper lip\u003c\/li\u003e \u003cli\u003eReliable protection against dirt and moisture\u003c\/li\u003e \u003cli\u003eDeveloped for demanding enduro, e-MTB and downhill use\u003c\/li\u003e \u003cli\u003eCustom-fit design for suspension forks with 38 mm stanchions\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe seal kit is suitable for the following suspension forks, among others:\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFOX\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003eFOX 38 Factory\u003c\/li\u003e \u003cli\u003eFOX 38 Performance Elite\u003c\/li\u003e \u003cli\u003eFOX 38 Performance\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRockShox\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003eRockShox ZEB\u003c\/li\u003e \u003cli\u003eRockShox Domain with 38 mm stanchions\u003c\/li\u003e \u003cli\u003eRockShox BoXXer D1 with 38 mm stanchions\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eThe stanchion diameter is not the only decisive factor. Please also check the exact model and model year of your suspension fork before ordering.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScope of delivery\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003e2 SKF Dual Compound oil and dust wipers\u003c\/li\u003e \u003cli\u003e2 pre-impregnated foam rings\u003c\/li\u003e \u003cli\u003e2 crush washers\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you need for installation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOil and grease are not included. To fit the seals, you also need:\u003c\/p\u003e\u003cul\u003e \u003cli\u003e\n\u003ca href=\"\/en\/products\/fl01-lower-leg-lube\" title=\"WPS FL01 Lower Leg Lube – Lubricating oil for suspension forks\"\u003eWPS FL01 Lower Leg Lube\u003c\/a\u003e: lubricating oil for the lower legs\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"\/en\/products\/danico-biotech-race-grease?variant=58816462881142\" title=\"Danico Biotech Race Grease\"\u003eDanico Biotech Race Grease\u003c\/a\u003e: for greasing the seal lips\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"\/en\/products\/push-industries-fork-seal-installation-tool?variant=58816518488438\" title=\"PUSH Industries Fork Seal Installation Tool\"\u003ePUSH seal installation tool\u003c\/a\u003e in 38 mm: presses the seals in straight without damaging them\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe easiest way: add everything to your basket with the 'Complete set for your lower leg service' on this page. With oil, you get a set discount.\u003c\/p\u003e\u003cp\u003eRather leave it to us? We fit them for you as part of the \u003ca href=\"\/en\/products\/lower-leg-service-inkl-skf-dichtungen-38-mm-fox-38-rockshox-zeb\" title=\"Lower leg service incl. SKF seals – 38 mm FOX 38 \u0026amp; RockShox ZEB\"\u003elower leg service incl. SKF seals\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth\u003eFeature\u003c\/th\u003e \u003cth\u003eSpecification\u003c\/th\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eManufacturer\u003c\/td\u003e \u003ctd\u003eSKF\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProduct series\u003c\/td\u003e \u003ctd\u003eDual Compound\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eArea of application\u003c\/td\u003e \u003ctd\u003eMTB, Enduro, E-MTB, Downhill\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eStanchion diameter\u003c\/td\u003e \u003ctd\u003e38 mm\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eManufacturer part number\u003c\/td\u003e \u003ctd\u003eMTBDUAL-38FRN\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eEAN\/GTIN\u003c\/td\u003e \u003ctd\u003e8050616065988\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCompatible brands\u003c\/td\u003e \u003ctd\u003eFOX and RockShox\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eScope of delivery\u003c\/td\u003e \u003ctd\u003e \u003cul\u003e \u003cli\u003e2 SKF Dual Compound oil and dust wipers\u003c\/li\u003e \u003cli\u003e2 pre-impregnated foam rings\u003c\/li\u003e \u003cli\u003e2 crush washers\u003c\/li\u003e \u003c\/ul\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently asked questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does Dual Compound mean?\u003c\/strong\u003e\u003cbr\u003eSKF combines two different rubber compounds within the seal. This allows low friction and a reliable seal to be combined in a targeted manner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the seals fit every suspension fork with 38 mm stanchions?\u003c\/strong\u003e\u003cbr\u003eNo. The stanchion diameter alone does not guarantee compatibility. The kit is designed for the listed FOX and RockShox models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install the seals myself?\u003c\/strong\u003e\u003cbr\u003eYes, if you can remove your fork's lower legs yourself. You'll need oil, grease and ideally a seal installation tool that matches your stanchion size (see 'What you need for installation'). Rather leave it to us? Book the \u003ca href=\"\/en\/products\/lower-leg-service-inkl-skf-dichtungen-38-mm-fox-38-rockshox-zeb\" title=\"Lower leg service incl. SKF seals – 38 mm FOX 38 \u0026amp; RockShox ZEB\"\u003elower leg service incl. SKF seals\u003c\/a\u003e.\u003c\/p\u003e","brand":"SKF","offers":[{"title":"Default Title","offer_id":58807877468534,"sku":"MTBDUAL-38FRN","price":33.8,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/acd7ba_7238bcc6a0304ed992cc462a06f650ae_mv2_f860d59e-26fe-40fd-8f97-e7413f9c74e3.webp?v=1790230168"},{"product_id":"vorsprung-smashpot-v1-v2-spring-isolator-pair","title":"Vorsprung Smashpot Spring Isolator (Pair)","description":"\u003cp\u003eThe \u003cstrong\u003eVorsprung Smashpot Spring Isolator\u003c\/strong\u003e is a two-piece isolation system for the Smashpot spring. It keeps the spring quiet and protects the stanchions from the inside.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eAlready included with all Smashpot springs and complete kits\u003c\/li\u003e\n\n\u003cli\u003eFor retrofitting older Smashpot kits\u003c\/li\u003e\n\n\u003cli\u003eReplaces the older spring housing in all forks\u003c\/li\u003e\n\n\u003cli\u003eReplaces the PVC liner that Vorsprung previously used in kits for RockShox ZEB and FOX 38\u003c\/li\u003e\n\n\u003cli\u003eFits Smashpot V1 and V2\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eMore about the brand on the \u003ca href=\"\/en\/collections\/vorsprung\" title=\"Vorsprung brand page\"\u003eVorsprung brand page\u003c\/a\u003e. Questions about which one to choose? \u003ca href=\"\/en\/pages\/contact\" title=\"Write to us\"\u003eWrite to us\u003c\/a\u003e – including your model, year, and if possible, your suspension component's serial number.\u003c\/p\u003e","brand":"Vorsprung","offers":[{"title":"Default Title","offer_id":58807878025590,"sku":"VS-13-07-7-00","price":12.5,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/acd7ba_c364d172801a418fad8d6c2b01df7658_mv2.png?v=1790230183"},{"product_id":"vorsprung-smashpot-v1-v2-coil-spring-spare-heat-shrink","title":"Vorsprung Smashpot heat shrink tubing for the spring (V1\/V2)","description":"\u003cp\u003eThe \u003cstrong\u003eVorsprung Smashpot spring heat shrink tubing\u003c\/strong\u003e is an original spare part that allows you to replace the heat shrink tubing on the spring of your Smashpot V1 or V2.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eOriginal spare part from Vorsprung (item number VS-HS-1.25-2-1)\u003c\/li\u003e\n\n\u003cli\u003eYou will need a heat gun to shrink it on\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eNot sure if you need the heat shrink tubing or the \u003ca href=\"\/en\/products\/vorsprung-smashpot-v1-v2-spring-isolator-pair\" title=\"Spring Isolator\"\u003eSpring Isolator\u003c\/a\u003e? \u003ca href=\"\/en\/pages\/contact\" title=\"Contact us\"\u003eContact us\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eMore about the brand on the \u003ca href=\"\/en\/collections\/vorsprung\" title=\"Vorsprung brand page\"\u003eVorsprung brand page\u003c\/a\u003e. Questions about selection? \u003ca href=\"\/en\/pages\/contact\" title=\"Contact us\"\u003eContact us\u003c\/a\u003e – including your model, year, and, if possible, the serial number of your suspension component.\u003c\/p\u003e","brand":"Vorsprung","offers":[{"title":"Default Title","offer_id":58807878058358,"sku":"VS-HS-1.25-2-1","price":4.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/acd7ba_a1e05ed693fc414d85eca547d2b1cfb7_mv2.webp?v=1790230182"},{"product_id":"ohlins-rxf38-m-3-sticker-kit","title":"Öhlins RXF38 m.3 Decal Kit","description":"\u003cp\u003e\u003cstrong\u003eÖhlins RXF38 m.3 Decal Kit – in three colours\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eGive your suspension fork a fresh look: With the Öhlins RXF38 m.3 decal kit, you can renew your fork graphics and match the aesthetics to your mountain bike. Choose between \u003cstrong\u003ewhite, grey, and yellow\u003c\/strong\u003e – to suit your personal style.\u003c\/p\u003e\u003cp\u003eThe sticker set is designed for the Öhlins RXF38 m.3 suspension fork and is suitable for replacing worn-out decals or for a change of colour.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cul\u003e \u003cli\u003e\n\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Öhlins RXF38 m.3 suspension fork\u003c\/li\u003e \u003cli\u003e\n\n\u003cstrong\u003eAvailable colours:\u003c\/strong\u003e White, grey, or yellow\u003c\/li\u003e \u003cli\u003e\n\n\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e 1 decal kit in the selected colour\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Yellow","offer_id":58816355107190,"sku":"19239-08","price":25.6,"currency_code":"CHF","in_stock":true},{"title":"White","offer_id":58816355139958,"sku":"19239-09","price":25.6,"currency_code":"CHF","in_stock":true},{"title":"Gray","offer_id":58816355172726,"sku":"19239-10","price":25.6,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/acd7ba_a655e3e7cd2349469bc9ebe7fc264ed1_mv2.jpg?v=1790317569"},{"product_id":"nd-tuned-air-shaft-extender-10mm-fox","title":"ND-Tuned Air Shaft Extender 10 mm for FOX air forks","description":"\u003cp\u003eWith the \u003cstrong\u003eND-Tuned Air Shaft Extender 10 mm\u003c\/strong\u003e, you can get 10 mm more travel out of your FOX air fork without buying a new air spring. The extension is mounted to the air spring shaft.\u003c\/p\u003e\u003ch3\u003eManufacturer Features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e+10 mm travel for FOX Float forks\u003c\/li\u003e\n\n\u003cli\u003eCNC-machined from 7075 aluminium, hard-anodized against corrosion\u003c\/li\u003e\n\n\u003cli\u003eBoth O-rings included\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eImportant\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eNot\u003c\/strong\u003e for the FOX 32 StepCast\u003c\/li\u003e\n\n\u003cli\u003eOnly up to the maximum travel approved by FOX for your fork – the extension must not be used beyond this\u003c\/li\u003e\n\n\u003cli\u003eInstallation should be performed by experienced hands. Prefer to have it done for you? \u003ca href=\"\/en\/pages\/contact\" title=\"Write to us\"\u003eWrite to us\u003c\/a\u003e.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eScope of delivery\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 Air Shaft Extender 10 mm with O-rings\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eQuestions about which one to choose? \u003ca href=\"\/en\/pages\/contact\" title=\"Write to us\"\u003eWrite to us\u003c\/a\u003e – including the model, model year, and if possible, the serial number of your suspension component.\u003c\/p\u003e","brand":"ND-Tuned","offers":[{"title":"Default Title","offer_id":58816355795318,"sku":"ND-120-061","price":36.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/acd7ba_e8fb0849a59e4c2bb3be930a21b625b0_mv2.png?v=1790317588"},{"product_id":"ohlins-rxf34-rxc34-100h-service-kit-air-spring","title":"Öhlins RXF34\/ RXC34 100h Service Kit (Air Spring)","description":"\u003cp\u003e\u003cstrong\u003eProduct information \"Öhlins RXF34\/ RXC34 100h Service Kit (Air Spring)\"\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThis ÖHLINS service kit contains various seals and spare parts for the 100h service of your RXF34 m.2\/ RXC34 m.1 air spring.\u003c\/p\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":58816358154614,"sku":"19547-01","price":47.5,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/acd7ba_f1535a3ce12e454e9825ac96ec4ee517_mv2.jpg?v=1790317611"},{"product_id":"mtb-raceshop-crush-washer-press-dichtscheiben","title":"MTB-Raceshop Crush Washers (Compression\/Sealing Washers)","description":"\u003cp\u003e\u003cstrong\u003eMTB-Raceshop Crush Washers (Compression\/Sealing Washers)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eCrush washers are compression and sealing washers for the lower bolts of suspension forks. When disassembling a fork, they are removed along with the foot nuts and subsequently \u003cstrong\u003ereplaced with new washers\u003c\/strong\u003e to reliably maintain the seal and ensure the correct fit of the fork legs.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVariants \u0026amp; Areas of Application\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePOM Large\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003e \u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e POM composite with MoS₂ \/ PTFE\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003e\u003cstrong\u003eInner diameter:\u003c\/strong\u003e 13 mm\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003e\u003cstrong\u003eOuter diameter:\u003c\/strong\u003e 15.95 mm\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e 2 mm\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Damper side of many suspension forks (e.g., Fox 34 \/ 36 \/ 40). Replaces 13 mm crush washers during oil bath service.\u003c\/p\u003e \u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePOM Small (Nylon)\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003e \u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e POM \/ Nylon\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003e\u003cstrong\u003eInner diameter:\u003c\/strong\u003e 8.10 mm\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003e\u003cstrong\u003eOuter diameter:\u003c\/strong\u003e 10.90 mm\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e 2 mm\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Spring side of Fox forks 32 \/ 34 \/ 36 (except Talas) as well as Fox 40. Suitable for most RockShox forks.\u003c\/p\u003e \u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAlu Fox\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003e \u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminium\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003e\u003cstrong\u003eInner diameter:\u003c\/strong\u003e 6.60 mm\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003e\u003cstrong\u003eOuter diameter:\u003c\/strong\u003e 11.12 mm\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e 2 mm\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Aluminium crush washer for Talas forks. Installed on the TALAS side and replaced with a new washer during service.\u003c\/p\u003e \u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eMaterial Properties\u003c\/p\u003e\u003cul\u003e \u003cli\u003e \u003cp\u003e\u003cstrong\u003ePOM (Polyoxymethylene):\u003c\/strong\u003e This high-performance thermoplastic features high stiffness, low friction, and excellent abrasion and chemical resistance. Variants with MoS₂ and PTFE additives are CNC-machined and offer an especially smooth surface and high durability.\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003e\u003cstrong\u003eAluminium:\u003c\/strong\u003e The metallic material ensures stable preload and is used in Talas systems.\u003c\/p\u003e \u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eProduct Details\u003c\/p\u003e\u003cul\u003e \u003cli\u003e \u003cp\u003e\u003cstrong\u003eSealing \u0026amp; Fit:\u003c\/strong\u003e The washers sit between the fork leg and the base stud. They are replaced upon every disassembly to prevent leaks and ensure the correct fit of the lower bolt. Fox recommends using new crush washers with every assembly.\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003e\u003cstrong\u003eAvailable Individually:\u003c\/strong\u003e All sizes can be ordered individually, ideal for specific service or repair tasks.\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003e\u003cstrong\u003eQuality \u0026amp; Compatibility:\u003c\/strong\u003e Precision manufacturing guarantees accurately fitting washers for a wide range of suspension forks; the dimensions (inner and outer diameter, height) make selection easier.\u003c\/p\u003e \u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"MTB-Raceshop","offers":[{"title":"POM small","offer_id":58816361365878,"sku":"MTBRS-CW-POM-S","price":1.1,"currency_code":"CHF","in_stock":true},{"title":"POM large","offer_id":58816361398646,"sku":"MTBRS-CW-POM-L","price":2.12,"currency_code":"CHF","in_stock":true},{"title":"ALU","offer_id":58816361431414,"sku":"MTBRS-CW-AL-FOX","price":1.38,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/acd7ba_1c060d9c58294ffda8b3512c3c0d125c_mv2.png?v=1790317628"},{"product_id":"ohlins-aufklebersatz-rxf38-m-2","title":"Öhlins decal kit RXF38 m.2","description":"\u003cp\u003e\u003cstrong\u003eProduct information \"Öhlins decal set RXF38 m.2 white\"\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003eÖhlins logo left and right\u003c\/li\u003e \u003cli\u003eTTX decal\u003c\/li\u003e \u003cli\u003eRebound decal\u003c\/li\u003e \u003cli\u003eRXF38 decal\u003c\/li\u003e \u003cli\u003eÖhlins decal\u003c\/li\u003e \u003cli\u003eAir setting chart\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Yellow","offer_id":58816385810806,"sku":"19239-05","price":40.9,"currency_code":"CHF","in_stock":true},{"title":"white","offer_id":58816385843574,"sku":"19239-06","price":40.9,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/acd7ba_67b07accfd734ddb8b35e8469497892a_mv2.jpg?v=1790317724"},{"product_id":"fox-25-38-180-gripx2-hsr-lsr-hsc-lsc-cart-compl-cfbv-cm-rl","title":"FOX GRIP X2 damper cartridge complete for FOX 38 (180 mm)","description":"\u003cp\u003eThe \u003cstrong\u003eFOX GRIP X2 damper cartridge\u003c\/strong\u003e is the complete damper for the 180 mm travel FOX 38, model year 2025 (FOX part number 820-18-543). The GRIP X2 is FOX's downhill damper with four adjusters.\u003c\/p\u003e\u003ch3\u003eAdjustment options\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eHigh-Speed Compression (HSC)\u003c\/li\u003e\n\n\u003cli\u003eLow-Speed Compression (LSC)\u003c\/li\u003e\n\n\u003cli\u003eHigh-Speed Rebound (HSR)\u003c\/li\u003e\n\n\u003cli\u003eLow-Speed Rebound (LSR)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eConversion at MTB-Raceshop\u003c\/h3\u003e\u003cp\u003eWe use this cartridge to upgrade your FOX 38 from GRIP2 to GRIP X2. We will check beforehand if your fork is compatible based on model year, travel, and serial number – \u003ca href=\"\/en\/pages\/contact\" title=\"write to us\"\u003ewrite to us\u003c\/a\u003e before ordering. Want more tuning? We can install the \u003ca href=\"\/en\/products\/wps-podium-tuning-kit-fox-grip-x2\" title=\"WPS Podium Tuning Kit for FOX GRIP X2\"\u003eWPS Podium Tuning Kit for FOX GRIP X2\u003c\/a\u003e at the same time.\u003c\/p\u003e\u003cp\u003eQuestions about the conversion? \u003ca href=\"\/en\/pages\/contact\" title=\"Write to us\"\u003eWrite to us\u003c\/a\u003e.\u003c\/p\u003e","brand":"FOX","offers":[{"title":"Default Title","offer_id":58816388366710,"sku":"820-18-543-KIT","price":499.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/acd7ba_5296cfda289f44498fab6290028ad686_mv2.webp?v=1790317754"},{"product_id":"axle-maxle-stealth-front-mtb-15x110","title":"RockShox Maxle Stealth front thru-axle 15x110 Boost (158 mm)","description":"\u003cp\u003eThe \u003cstrong\u003eRockShox Maxle Stealth 15x110\u003c\/strong\u003e is a replacement thru-axle for the front wheel of RockShox forks with a 15x110 Boost mount.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eAxle: 15x110 mm, Boost\u003c\/li\u003e\n\n\u003cli\u003eLength: 158 mm\u003c\/li\u003e\n\n\u003cli\u003eThread: M15x1.5\u003c\/li\u003e\n\n\u003cli\u003eThread length: 9 mm\u003c\/li\u003e\n\n\u003cli\u003eSRAM part number: 00.4318.005.019\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eCompare the length and thread with your existing axle. You can determine which version and model year you have using the RockShox Trailhead app or \u003ca href=\"https:\/\/trailhead.rockshox.com\/en\/product\/search\/serial\" target=\"_blank\" rel=\"noopener\" title=\"RockShox TrailHead\"\u003etrailhead.rockshox.com\u003c\/a\u003e by entering your serial number. Manuals and exploded view diagrams can be found at sram.com\/service.\u003c\/p\u003e\u003cp\u003eFind out more about the brand on the \u003ca href=\"\/en\/collections\/rock-shox\" title=\"RockShox brand page\"\u003eRockShox brand page\u003c\/a\u003e. Questions about which one to choose? \u003ca href=\"\/en\/pages\/contact\" title=\"Write to us\"\u003eWrite to us\u003c\/a\u003e – including the model, model year, and, if possible, the serial number of your suspension component.\u003c\/p\u003e","brand":"RockShox","offers":[{"title":"Default Title","offer_id":58816388399478,"sku":"00.4318.005.019","price":37.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/acd7ba_03f4559a5e704330bcc94da392f2bbc4_mv2.jpg?v=1790317756"},{"product_id":"maxle-dh-20x110-achse","title":"RockShox Maxle DH Thru-Axle 20x110 (158 mm) for BoXXer","description":"\u003cp\u003eThe \u003cstrong\u003eRockShox Maxle DH 20x110\u003c\/strong\u003e is a replacement front thru-axle for the RockShox BoXXer.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eAxle: 20x110 mm\u003c\/li\u003e\n\n\u003cli\u003eLength: 158 mm\u003c\/li\u003e\n\n\u003cli\u003eThread: M20x1.5\u003c\/li\u003e\n\n\u003cli\u003eCompatibility: BoXXer from version C1 (2019) onwards\u003c\/li\u003e\n\n\u003cli\u003eSRAM part number: 00.4318.027.000\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eYou can identify which version and model year you have using the RockShox Trailhead app or \u003ca href=\"https:\/\/trailhead.rockshox.com\/en\/product\/search\/serial\" target=\"_blank\" rel=\"noopener\" title=\"RockShox TrailHead\"\u003etrailhead.rockshox.com\u003c\/a\u003e by entering your serial number. Manuals and exploded view diagrams can be found at sram.com\/service.\u003c\/p\u003e\u003cp\u003eFind more about the brand on the \u003ca href=\"\/en\/collections\/rock-shox\" title=\"RockShox brand page\"\u003eRockShox brand page\u003c\/a\u003e. Questions about which one to choose? \u003ca href=\"\/en\/pages\/contact\" title=\"Write to us\"\u003eWrite to us\u003c\/a\u003e – including your model, model year, and if possible, the serial number of your suspension component.\u003c\/p\u003e","brand":"RockShox","offers":[{"title":"Default Title","offer_id":58816389513590,"sku":"00.4318.027.000","price":51.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/acd7ba_8c7596c38a9b4b5781729dbe9d6e9499_mv2.jpg?v=1790317760"},{"product_id":"rockshox-schrader-valve-core-1-set-2-pcs","title":"RockShox Schrader valve core (2 pieces) for forks, shocks, and Reverb","description":"\u003cp\u003eThe \u003cstrong\u003eRockShox Air Valve Kit\u003c\/strong\u003e contains 2 Schrader valve cores for the air valves of RockShox forks, rear shocks, and Reverb seatposts. A leaking valve core is a common cause of slow air loss.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eContents: 2 Schrader valve cores\u003c\/li\u003e\n\n\u003cli\u003eSRAM part number: 11.4308.327.002\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eRecommended by RockShox for\u003c\/h3\u003e\u003cp\u003e28mm Sid \/ Psylo \/ Judy, 30 Gold 2014–2020 (A1–A2), 30 Silver from 2016, 35 Gold from 2020 (A1–A2), 35 Silver from 2021 (A1), Argyle 2007–2017, Ario \/ Bar \/ MC \/ Pearl, Bluto from 2015, BoXXer 2010–2023 (A1–C2), Deluxe 2017–2022 (A1–B2), Deluxe Trek Re:AKTIV, Domain 35 mm 2007–2016, Domain 38 mm from 2022 (B1), Duke \/ Psylo, Judy Gold and Silver from 2018, Lyrik 2010–2022, Monarch, Monarch Plus, Monarch RT3, Monarch XX, Paragon, Pike 2005–2022, Pike DJ from 2014, RS1 2015–2019, Reba, Recon, Revelation, Rudy XPLR from 2022, SID 2008–2023, SID SL 32 mm 2021–2023, SIDLuxe 2020–2023, Sektor, Super Deluxe 2018–2022 (A1–B1), Super Deluxe Thru Shaft from 2021 (C1), Tora, Totem 2010–2013, Vivid Air 2008–2013 and from 2014 (B1–B2), Vivid Coil 2008–2013 and from 2014 (B1–B3), XC30, XC32, Yari from 2016, ZEB 2021–2022 (A1)\u003c\/p\u003e\u003cp\u003eYou can identify which version and model year you have using the RockShox Trailhead app or \u003ca href=\"https:\/\/trailhead.rockshox.com\/en\/product\/search\/serial\" target=\"_blank\" rel=\"noopener\" title=\"RockShox TrailHead\"\u003etrailhead.rockshox.com\u003c\/a\u003e by entering the serial number. Manuals and exploded view drawings can be found at sram.com\/service.\u003c\/p\u003e\u003cp\u003eFind more about the brand on the \u003ca href=\"\/en\/collections\/rock-shox\" title=\"RockShox brand page\"\u003eRockShox brand page\u003c\/a\u003e. Questions about which one to choose? \u003ca href=\"\/en\/pages\/contact\" title=\"Contact us\"\u003eContact us\u003c\/a\u003e – including your model, model year, and if possible, the serial number of your suspension component.\u003c\/p\u003e","brand":"RockShox","offers":[{"title":"Default Title","offer_id":58816392593782,"sku":"11.4308.327.002","price":7.8,"currency_code":"CHF","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/acd7ba_54930e9334754dd9806fc0ec9fb6da88_mv2.jpg?v=1790317773"},{"product_id":"ohlins-aufklebersatz-rxf36-m-2-gelb-weiss","title":"Öhlins decal kit RXF36 m.2 yellow\/white","description":"\u003cp\u003eProduct information \"Öhlins sticker set RXF36 m.2 yellow\/white\"\u003c\/p\u003e\u003cp\u003eÖhlins sticker set RXF36 m.2 yellow\/white\u003c\/p\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":58816393707894,"sku":"18776-03","price":34.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/acd7ba_ef35a2081f8749ca99275ecca2696502_mv2.jpg?v=1790317774"},{"product_id":"ohlins-schrader-ventil-ersatzteile-kit","title":"Öhlins Schrader valve spare parts kit","description":"\u003cp\u003eProduct information \"Öhlins Schrader valve spare parts kit\"\u003c\/p\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":58816393740662,"sku":"18850-15","price":50.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/acd7ba_4972d90cc59444a98edebfec268017d7_mv2.jpg?v=1790317775"},{"product_id":"ohlins-einsteller-kit-rxf36-rxf38-m-2-ttx18","title":"Öhlins adjuster kit RXF36\/ RXF38 m.2 TTX18","description":"\u003cp\u003e\u003cstrong\u003eProduct information \"Öhlins adjuster kit RXF36\/ RXF38 m.2 TTX18\"\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003eRebound and compression adjusters\u003c\/li\u003e \u003cli\u003eMounting screws\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":58816395346294,"sku":"18782-01","price":80.2,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/acd7ba_cdb1f9b0b59544a994e4cb8a3a88b490_mv2.jpg?v=1790317794"},{"product_id":"ohlins-bash-cap","title":"Öhlins Bash Cap","description":"\u003cp\u003e\u003cstrong\u003eProduct information \"Öhlins Bash Cap\"\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eReplacement protective cap for your rebound adjuster or ramp-up valve.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003e1x Bash Cap incl. seal\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":58816404586870,"sku":"19244-05","price":22.5,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/acd7ba_f63af14fb82b453283262e3e3faa02d5_mv2.jpg?v=1790317801"},{"product_id":"bottomless-tokens-35mm-38mm-solo-air-debonair","title":"RockShox Bottomless Tokens for 35mm and 38mm forks (3-pack)","description":"\u003cp\u003eWith \u003cstrong\u003eRockShox Bottomless Tokens\u003c\/strong\u003e, you can adjust the progression of your RockShox fork's air spring. Each token reduces the air volume: the fork becomes firmer towards the end of the travel and is less likely to bottom out.\u003c\/p\u003e\u003ch3\u003eWhat the tokens do\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eMore tokens: more end-stroke progression and reserves for jumps, drops, and rough trails\u003c\/li\u003e\n\n\u003cli\u003eFewer tokens: a more linear spring curve, making it easier to use the full travel\u003c\/li\u003e\n\n\u003cli\u003eYou do not change the air pressure for the sag—the tokens primarily affect the final part of the travel\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eContents: 3 Bottomless Tokens\u003c\/li\u003e\n\n\u003cli\u003eFor Solo Air and DebonAir with 35 mm or 38 mm stanchions\u003c\/li\u003e\n\n\u003cli\u003eSRAM part number: 11.4018.032.000\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eCompatible according to RockShox with\u003c\/h3\u003e\u003cp\u003eBoXXer 2010–2018 (A1–B2) and from 2024 (D1), Domain 38 mm from 2022 (B1) and from 2025 (C1), Lyrik 2016–2022 and from 2023 (D1–D2), Pike 2014–2022 and from 2023 (C1–C2), Pike 29+ 2017–2019, Pike DJ from 2014, Psylo from 2025, Revelation 35 mm from 2018, SID 35 mm 2021–2023, Yari from 2016, ZEB 2021–2022 and from 2023 (A2–A3)\u003c\/p\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eRelease the air, open the air chamber top cap, and screw the tokens onto the top cap. The maximum number for your fork can be found in the RockShox manual.\u003c\/p\u003e\u003cp\u003eYou can find out which version and model year you have using the RockShox Trailhead app or \u003ca href=\"https:\/\/trailhead.rockshox.com\/en\/product\/search\/serial\" target=\"_blank\" rel=\"noopener\" title=\"RockShox TrailHead\"\u003etrailhead.rockshox.com\u003c\/a\u003e by entering your serial number. Manuals and exploded view drawings can be found at sram.com\/service.\u003c\/p\u003e\u003cp\u003eMore about the brand on the \u003ca href=\"\/en\/collections\/rock-shox\" title=\"RockShox brand page\"\u003eRockShox brand page\u003c\/a\u003e. Questions about which one to choose? \u003ca href=\"\/en\/pages\/contact\" title=\"Write to us\"\u003eWrite to us\u003c\/a\u003e – including your model, model year, and if possible, the serial number of your suspension component.\u003c\/p\u003e","brand":"RockShox","offers":[{"title":"Default Title","offer_id":58816405406070,"sku":"11.4018.032.000","price":13.7,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/acd7ba_e44156ebebf2477daf921081f184846d_mv2.jpg?v=1790317809"},{"product_id":"ohlins-coil-kit","title":"Öhlins Coil Kit – Coil Spring Conversion for RXF36, RXF38, and DH38","description":"\u003cp\u003eThe \u003cstrong\u003eÖhlins Coil Kit\u003c\/strong\u003e converts your Öhlins RXF36 m.3, RXF38 (m.2 and m.3), or DH38 (m.1 and m.2) from an air spring to a coil spring. It replaces the air cartridge with a coil shaft and a top cap with adjustable preload. Thanks to the design of the Öhlins air cartridge, you can convert back to an air spring at any time.\u003c\/p\u003e\u003ch3\u003eAdvantages of the coil spring\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eLess friction and more sensitive response to small bumps\u003c\/li\u003e\n\n\u003cli\u003eAlmost no maintenance on the spring side\u003c\/li\u003e\n\n\u003cli\u003eLess dependent on temperature and altitude than an air spring\u003c\/li\u003e\n\n\u003cli\u003eTravel adjustable in 10 mm increments: Simply reposition the bolt on the piston rod\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eVersions and travel\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eRXF36 m.3:\u003c\/strong\u003e 140 to 160 mm travel\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eRXF38 m.2\/m.3:\u003c\/strong\u003e 130 to 180 mm travel, factory set to 170 mm\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eDH38 m.1\/m.2:\u003c\/strong\u003e 160 to 200 mm travel, factory set to 200 mm\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eThe coil shaft is not interchangeable between fork models—choose the version that matches your fork. The RXF36 m.3 kit does not fit the RXF36 m.1 or m.2: For these, there is the \u003ca href=\"\/en\/products\/ohlins-coil-shaft-kit\" title=\"Öhlins Coil Shaft Kit\"\u003eCoil Shaft Kit\u003c\/a\u003e and \u003ca href=\"\/en\/products\/ohlins-coil-preload-adjuster\" title=\"Öhlins Coil Preload Adjuster\"\u003eCoil Preload Adjuster\u003c\/a\u003e available separately. For other Öhlins forks, \u003ca href=\"\/en\/pages\/contact\" title=\"Contact us\"\u003econtact us\u003c\/a\u003e with the model and serial number, and we will check compatibility.\u003c\/p\u003e\u003ch3\u003eScope of delivery\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eCoil shaft for the selected fork\u003c\/li\u003e\n\n\u003cli\u003eTop cap with adjustable preload (Preload Adjuster)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eOrder spring separately\u003c\/h3\u003e\u003cp\u003eThe spring is not included. Öhlins offers them in seven rates from 40 to 70 lbs (7.0 to 12.4 N\/mm): \u003ca href=\"\/en\/products\/ohlins-fork-spring-rxf36-m-3\" title=\"Öhlins spring for RXF36 m.3\"\u003eSpring for RXF36 m.3\u003c\/a\u003e · \u003ca href=\"\/en\/products\/ohlins-fork-spring-18-5-335-fur-rxf38m-2\" title=\"Öhlins spring for RXF38\"\u003eSpring for RXF38\u003c\/a\u003e · \u003ca href=\"\/en\/products\/ohlins-fork-spring-18-5-408-fur-dh38-umbaukit\" title=\"Öhlins spring for DH38\"\u003eSpring for DH38\u003c\/a\u003e. Which rate is right for you depends on your rider weight including gear and your riding style—we are happy to help you choose.\u003c\/p\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eInstallation requires special tools from Öhlins. The easiest way is to let us do it: We will install the kit and mount the spring if you order it at the same time.\u003c\/p\u003e\u003ch3\u003eOptions\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eInstallation by MTB-Raceshop:\u003c\/strong\u003e If you select \"Yes,\" we will install the coil kit into your fork—order the matching spring at the same time. To do this, choose your drop-off date. Your fork must reach us by the working day before at the latest – or bring it to Dällikon by arrangement.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eShipping:\u003c\/strong\u003e With \"Shipping label,\" you will receive a prepaid Swiss Post label via PDF by email—simply print it, stick it on the package, and drop it off at the post office. If you don't have a suitable box, you can purchase one from us by selecting \"Fork box.\" If you are dropping the fork off in person or shipping it yourself, select \"Self-organised.\" If you don't need installation, select \"Not needed.\"\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eCan I convert back to an air spring?\u003c\/h4\u003e\u003cp\u003eYes. The fork can be converted between air and coil springs as often as you like. So, keep the air cartridge in a safe place.\u003c\/p\u003e\u003ch4\u003eAir or coil spring—what is better?\u003c\/h4\u003e\u003cp\u003eThe coil spring is more sensitive and requires almost no maintenance, but it is heavier. You can only change the spring rate by swapping to a different spring, and Öhlins springs are linear. The air spring can be adjusted more finely. If you adjust your setup often, it is better to stick with air. If you have found your ideal spring and just want to ride, the coil spring is the right choice.\u003c\/p\u003e\u003ch4\u003eWhich spring do I need?\u003c\/h4\u003e\u003cp\u003eThis mainly depends on your rider weight including kit and your riding style. You'll find the table with all spring rates and Öhlins' guide values in our guide \u003ca href=\"\/en\/blogs\/ratgeber\/oehlins-federhaerte-tabelle\" title=\"Öhlins spring rate: table\"\u003eÖhlins spring rate\u003c\/a\u003e. Or send us your weight and riding discipline and we'll recommend the right rate.\u003c\/p\u003e\u003cp\u003eFind out more about the brand on the \u003ca href=\"\/en\/collections\/oehlins\" title=\"Öhlins brand page\"\u003eÖhlins brand page\u003c\/a\u003e. Questions about selection? \u003ca href=\"\/en\/pages\/contact\" title=\"Contact us\"\u003eContact us\u003c\/a\u003e—including the model, year of manufacture, and, if possible, the serial number of your suspension component.\u003c\/p\u003e","brand":"Öhlins","offers":[{"title":"RXF36 m.3 \/ Yes \/ I'll arrange it myself","offer_id":58960525001078,"sku":"19621-01+E","price":279.0,"currency_code":"CHF","in_stock":true},{"title":"RXF36 m.3 \/ Yes \/ Shipping label","offer_id":58960525033846,"sku":"19621-01+E+V","price":289.0,"currency_code":"CHF","in_stock":true},{"title":"RXF36 m.3 \/ Yes \/ Fork box","offer_id":58960525066614,"sku":"19621-01+E+K","price":299.0,"currency_code":"CHF","in_stock":true},{"title":"RXF36 m.3 \/ Yes \/ Fork box + shipping label","offer_id":58960525099382,"sku":"19621-01+E+K+V","price":309.0,"currency_code":"CHF","in_stock":true},{"title":"RXF36 m.3 \/ No \/ Not needed","offer_id":58960524968310,"sku":"19621-01","price":199.0,"currency_code":"CHF","in_stock":true},{"title":"RXF38 m.2\/m.3 \/ Yes \/ I'll arrange it myself","offer_id":58816408912246,"sku":"19285-01+E","price":279.0,"currency_code":"CHF","in_stock":true},{"title":"RXF38 m.2\/m.3 \/ Yes \/ Shipping label","offer_id":58960317317494,"sku":"19285-01+E+V","price":289.0,"currency_code":"CHF","in_stock":true},{"title":"RXF38 m.2\/m.3 \/ Yes \/ Fork box","offer_id":58960317350262,"sku":"19285-01+E+K","price":299.0,"currency_code":"CHF","in_stock":true},{"title":"RXF38 m.2\/m.3 \/ Yes \/ Fork box + shipping label","offer_id":58960317383030,"sku":"19285-01+E+K+V","price":309.0,"currency_code":"CHF","in_stock":true},{"title":"RXF38 m.2\/m.3 \/ No \/ Not needed","offer_id":58816408945014,"sku":"19285-01","price":199.0,"currency_code":"CHF","in_stock":true},{"title":"DH38 m.1\/m.2 \/ Yes \/ I'll arrange it myself","offer_id":58816408846710,"sku":"19284-01+E","price":279.0,"currency_code":"CHF","in_stock":true},{"title":"DH38 m.1\/m.2 \/ Yes \/ Shipping label","offer_id":58960317219190,"sku":"19284-01+E+V","price":289.0,"currency_code":"CHF","in_stock":true},{"title":"DH38 m.1\/m.2 \/ Yes \/ Fork box","offer_id":58960317251958,"sku":"19284-01+E+K","price":299.0,"currency_code":"CHF","in_stock":true},{"title":"DH38 m.1\/m.2 \/ Yes \/ Fork box + shipping label","offer_id":58960317284726,"sku":"19284-01+E+K+V","price":309.0,"currency_code":"CHF","in_stock":true},{"title":"DH38 m.1\/m.2 \/ No \/ Not needed","offer_id":58816408879478,"sku":"19284-01","price":199.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/acd7ba_422a06ff082f40d79a80fb5275bc65f7_mv2.jpg?v=1790317841"},{"product_id":"ohlins-factory-racing-lower-leg-unit-yellow","title":"Öhlins Factory Racing Lower leg unit Yellow","description":"\u003cp\u003e\u003cstrong\u003eProduct information \"Öhlins Factory Racing Lower leg unit Yellow\"\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eAdd a pop of colour to your bike with the limited-edition Factory Yellow fork lowers. Whether you are rocking the trails or the bike park, the striking look of these lowers—painted in our unmistakable Factory Yellow—is a real head-turner.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCurrently available for the following fork models:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cul\u003e \u003cli\u003eDH38\u003c\/li\u003e \u003cli\u003eRXF34\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLimited-edition racing products - These products have been developed and offered specifically for racing use (potentially involving extreme stress); therefore, no manufacturer warranty is provided.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Öhlins","offers":[{"title":"DH38","offer_id":58816409207158,"sku":"M23802-04","price":535.5,"currency_code":"CHF","in_stock":true},{"title":"RXF34","offer_id":58816409239926,"sku":"M23802-01","price":464.1,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/acd7ba_5499a5e04b504dcca8be19ea1ae10ffb_mv2.jpg?v=1790317843"},{"product_id":"ohlins-coil-shaft-kit","title":"Öhlins Coil Shaft Kit","description":"\u003cp\u003eÖhlins Coil Shaft Kit\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVersions \/ Manufacturer Part Numbers:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eRXF36 m.1\/m.2 (120-170 mm): 18869-17\u003c\/li\u003e\n\n\u003cli\u003eRXF38 m.2\/m.3 (130-180 mm): 18869-01\u003c\/li\u003e\n\n\u003cli\u003eDH38 m.1\/m.2 (160-200 mm): 18869-02\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"RXF36 m.1\/m.2 (120-170 mm)","offer_id":58842114720118,"sku":"18869-17","price":91.65,"currency_code":"CHF","in_stock":true},{"title":"RXF38 m.2\/m.3 (130-180 mm)","offer_id":58842114752886,"sku":"18869-01","price":139.6,"currency_code":"CHF","in_stock":false},{"title":"DH38 m.1\/m.2 (160-200 mm)","offer_id":58842114785654,"sku":"18869-02","price":139.6,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/18869-17-0.jpg?v=1790666320"},{"product_id":"ohlins-coil-preload-adjuster","title":"Öhlins Coil Preload Adjuster","description":"\u003cp\u003eÖhlins Coil Preload Adjuster\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVersions \/ Manufacturer Part Numbers:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eRXF36 m.1\/m.2: 18884-03\u003c\/li\u003e\n\n\u003cli\u003eRXF38 m.2\/m.3: 18884-05\u003c\/li\u003e\n\n\u003cli\u003eDH38 m.1\/m.2: 18884-06\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"RXF36 m.1\/m.2","offer_id":58842114916726,"sku":"18884-03","price":70.5,"currency_code":"CHF","in_stock":true},{"title":"RXF38 m.2\/m.3","offer_id":58842114949494,"sku":"18884-05","price":78.1,"currency_code":"CHF","in_stock":true},{"title":"DH38 m.1\/m.2","offer_id":58842114982262,"sku":"18884-06","price":78.1,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/18884-03-0.jpg?v=1790666321"},{"product_id":"ohlins-lower-leg-unit-rxf36-m-2","title":"Öhlins Lower Leg Unit RXF36 m.2","description":"\u003cp\u003eÖhlins Lower Leg Unit RXF36 m.2\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVersions \/ Manufacturer Part Numbers:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003e29\": 18872-09\u003c\/li\u003e\n\n\u003cli\u003e27.5\": 18872-10\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"29\"","offer_id":58842115047798,"sku":"18872-09","price":282.0,"currency_code":"CHF","in_stock":true},{"title":"27.5\"","offer_id":58842115080566,"sku":"18872-10","price":282.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/18872-09-0.jpg?v=1790666320"},{"product_id":"ohlins-bushing-kit-rxf36-rxf38-dh38","title":"Öhlins Bushing Kit RXF36 \/ RXF38 \/ DH38","description":"\u003cp\u003eÖhlins Bushing Kit RXF36 \/ RXF38 \/ DH38\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVersions \/ Manufacturer Part Numbers:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eRXF36: 18881-04\u003c\/li\u003e\n\n\u003cli\u003eRXF38 \/ DH38: 18881-05\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"RXF36","offer_id":58842115178870,"sku":"18881-04","price":100.15,"currency_code":"CHF","in_stock":true},{"title":"RXF38 \/ DH38","offer_id":58842115211638,"sku":"18881-05","price":100.15,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/18881-04-0.jpg?v=1790666321"},{"product_id":"ohlins-air-spring-rebuilding-kit","title":"Öhlins Air Spring Rebuild Kit","description":"\u003cp\u003eÖhlins Air Spring Rebuilding Kit\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVersions \/ Manufacturer Part Numbers:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003e90 mm: 18976-09\u003c\/li\u003e\n\n\u003cli\u003e100 mm: 18976-08\u003c\/li\u003e\n\n\u003cli\u003e120 mm: 18976-01\u003c\/li\u003e\n\n\u003cli\u003e130 mm: 18976-02\u003c\/li\u003e\n\n\u003cli\u003e140 mm: 18976-03\u003c\/li\u003e\n\n\u003cli\u003e150 mm: 18976-04\u003c\/li\u003e\n\n\u003cli\u003e160 mm: 18976-05\u003c\/li\u003e\n\n\u003cli\u003e170 mm: 18976-06\u003c\/li\u003e\n\n\u003cli\u003e180 mm: 18976-07\u003c\/li\u003e\n\n\u003cli\u003e200 mm: 18976-10\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"90 mm","offer_id":58842117767542,"sku":"18976-09","price":50.95,"currency_code":"CHF","in_stock":true},{"title":"100 mm","offer_id":58842117800310,"sku":"18976-08","price":50.95,"currency_code":"CHF","in_stock":true},{"title":"120 mm","offer_id":58842117833078,"sku":"18976-01","price":52.7,"currency_code":"CHF","in_stock":true},{"title":"130 mm","offer_id":58842117865846,"sku":"18976-02","price":52.7,"currency_code":"CHF","in_stock":true},{"title":"140 mm","offer_id":58842117898614,"sku":"18976-03","price":52.7,"currency_code":"CHF","in_stock":true},{"title":"150 mm","offer_id":58842117931382,"sku":"18976-04","price":50.95,"currency_code":"CHF","in_stock":true},{"title":"160 mm","offer_id":58842117964150,"sku":"18976-05","price":50.95,"currency_code":"CHF","in_stock":true},{"title":"170 mm","offer_id":58842117996918,"sku":"18976-06","price":50.95,"currency_code":"CHF","in_stock":true},{"title":"180 mm","offer_id":58842118029686,"sku":"18976-07","price":50.95,"currency_code":"CHF","in_stock":true},{"title":"200 mm","offer_id":58842118062454,"sku":"18976-10","price":50.95,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/18976-09-0.jpg?v=1790666320"},{"product_id":"ohlins-aufklebersatz-dh38","title":"Öhlins decal kit DH38","description":"\u003cp\u003eÖhlins decal kit DH38\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVersions \/ Manufacturer part numbers:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eYellow: 19239-01\u003c\/li\u003e\n\n\u003cli\u003eWhite: 19239-02\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Yellow","offer_id":58842118259062,"sku":"19239-01","price":40.7,"currency_code":"CHF","in_stock":true},{"title":"White","offer_id":58842118291830,"sku":"19239-02","price":40.7,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/19239-01-0.jpg?v=1790666321"},{"product_id":"ohlins-base-cap-mutter-m12x0-75-m20","title":"Öhlins base cap nut M12x0.75 M20","description":"\u003cp\u003eÖhlins base cap nut M12x0.75 M20\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVersions \/ Manufacturer part numbers:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eStandard: 19243-07\u003c\/li\u003e\n\n\u003cli\u003ewith external thread: 19243-05\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Standard","offer_id":58842118324598,"sku":"19243-07","price":31.8,"currency_code":"CHF","in_stock":false},{"title":"with external thread","offer_id":58842118357366,"sku":"19243-05","price":32.55,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/19243-07-0.jpg?v=1790666320"},{"product_id":"ohlins-air-spring-31-rxf34","title":"Öhlins Air Spring 31 RXF34","description":"\u003cp\u003eÖhlins Air Spring 31 RXF34\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVersions \/ Manufacturer Part Numbers:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003e120 mm: 19543-03\u003c\/li\u003e\n\n\u003cli\u003e130 mm: 19543-04\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"120 mm","offer_id":58842120651126,"sku":"19543-03","price":229.25,"currency_code":"CHF","in_stock":true},{"title":"130 mm","offer_id":58842120683894,"sku":"19543-04","price":229.25,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/19543-03-0.jpg?v=1790666321"},{"product_id":"ohlins-sticker-kit-rxf36-165x190mm-gelb","title":"Öhlins Decal Kit RXF36 165x190mm Yellow","description":"\u003cp\u003eSticker kit in yellow for the Öhlins RXF36 suspension fork, size 165 x 190 mm. Use this to replace worn or damaged fork decals on your RXF36.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 18724-14\u003c\/p\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":58842124157302,"sku":"18724-14","price":25.3,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/18724-14-0.jpg?v=1790666320"},{"product_id":"ohlins-base-cap-mutter-set-1x-m10x0-75-2x-m12x0-75-m20","title":"Öhlins base cap nut set (1x M10x0.75, 2x M12x0.75 M20)","description":"\u003cp\u003eReplacement set with three base cap nuts for Öhlins suspension forks: 1x M10x0.75 and 2x M12x0.75 M20. These nuts are located at the bottom of the lower legs and hold the piston rods on the damper and spring sides. You need this set if a nut is lost or damaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18872-08\u003c\/p\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":58842131693942,"sku":"18872-08","price":55.35,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/18872-08-0.jpg?v=1790666321"},{"product_id":"ohlins-spare-part-kit-foam-rings-38mm-10pcs","title":"Öhlins spare part kit foam rings 38mm - 10pcs","description":"\u003cp\u003e10 replacement foam rings in 38 mm for Öhlins suspension forks, which sit in the casting under the wiper seals. There, they retain lubricating oil on the seals and stanchions. During a service, soak them in fresh fork oil according to the Öhlins service manual before reinstalling them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 18872-13\u003c\/p\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":58842131726710,"sku":"18872-13","price":27.2,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/18872-13-0.jpg?v=1790666320"},{"product_id":"ohlins-einsteller-kit-rxf36-m-1-ttx22","title":"Öhlins adjuster kit RXF36 m.1 TTX22","description":"\u003cp\u003eAdjuster kit for the Öhlins RXF36 m.1 suspension fork with TTX22 cartridge, including original adjusters for rebound and compression. Also includes the necessary mounting hardware with screws and springs. Use this to replace lost or damaged adjusters and restore precise damping adjustment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 18873-01\u003c\/p\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":58842131759478,"sku":"18873-01","price":76.4,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/18873-01-0.jpg?v=1790666320"},{"product_id":"ohlins-coil-service-kit-rxf36-rxf38-dh38","title":"Öhlins Coil Service Kit RXF36\/ RXF38\/ DH38","description":"\u003cp\u003eCoil Service Kit for Öhlins RXF36, RXF38 and DH38 suspension forks with steel spring. When servicing the spring unit, use this to replace the O-rings and heat-shrink tubing that protect the steel spring. The colour of the tubing indicates the spring rate.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003e2 O-rings\u003c\/li\u003e\n\n\u003cli\u003eHeat-shrink tubing, 3 pieces each in red, yellow, green, blue, white and black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 18885-01\u003c\/p\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":58842131890550,"sku":"18885-01","price":18.45,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/18885-01-0.jpg?v=1790666320"},{"product_id":"ohlins-seal-head-assembly-kit-rxf36-34-dh38-blue","title":"Öhlins Seal Head Assembly Kit RXF36\/34 \u0026 DH38 Blue","description":"\u003cp\u003eSeal Head Assembly Kit in the blue version for the air spring cartridge of Öhlins RXF34, RXF36, RXF38 and DH38 suspension forks. For forks that still have the gold seal head, the conversion increases the negative air chamber. The blue seal head has a revised wiper seal and is supplied with a pre-installed white volume spacer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 18976-50\u003c\/p\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":58842131988854,"sku":"18976-50","price":73.6,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/18976-50-0.jpg?v=1790666321"},{"product_id":"ohlins-sp-lower-leg-unit-dh38","title":"Öhlins SP Lower Leg Unit DH38","description":"\u003cp\u003eReplacement lower leg unit for the Öhlins DH38 suspension fork. The inner stanchions slide within the lower leg unit, which is also where the front wheel attaches via the thru-axle. You need this as a replacement if the old casting is damaged or worn.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 19231-01\u003c\/p\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":58842135593334,"sku":"19231-01","price":470.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/19231-01-0.jpg?v=1790666320"},{"product_id":"ohlins-sp-lower-leg-unit-rxf38-m-2-15x110","title":"Öhlins SP Lower Leg unit RXF38 m.2 15x110","description":"\u003cp\u003eLower Leg Unit for the Öhlins RXF38 m.2 suspension fork with 15x110 mm Boost thru-axle. The stanchions slide within the lower leg unit. You need this as a replacement if the old casting is damaged or worn out. Lower leg units are wheel size specific, so please check the fork model and wheel size before purchasing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 19231-03\u003c\/p\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":58842135626102,"sku":"19231-03","price":470.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/19231-03-0.jpg?v=1790666320"},{"product_id":"ohlins-rxf38-m-3-lower-leg-unit-black-gloss","title":"Öhlins RXF38 m.3 lower leg assembly gloss black","description":"\u003cp\u003eLower leg unit in gloss black for the Öhlins RXF38 m.3 suspension fork with 15x110 mm Boost thru-axle. The stanchions slide within the lower leg unit. You need this as a replacement if the old casting is damaged or worn. Lower leg units are wheel size specific, so please check the fork model and wheel size before purchasing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 19231-04\u003c\/p\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":58842135724406,"sku":"19231-04","price":457.4,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/19231-04-0.jpg?v=1790666320"},{"product_id":"ohlins-dh38-m-2-lower-leg-unit-black-gloss","title":"Öhlins DH38 m.2 lower leg unit gloss black","description":"\u003cp\u003eLower leg unit in gloss black for the Öhlins DH38 m.2 suspension fork. The inner tubes slide within the lower leg unit, and the front wheel is attached to it via the thru-axle. You need this as a replacement if the old casting is damaged or worn.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 19231-05\u003c\/p\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":58842135757174,"sku":"19231-05","price":480.3,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/19231-05-0.jpg?v=1790666320"},{"product_id":"ohlins-stanchion-dh38","title":"Öhlins Stanchion DH38","description":"\u003cp\u003eReplacement stanchion for all Öhlins DH38 suspension forks with 38 mm stanchions. The stanchion is black anodized. You need this if a stanchion has scratches or dents, because a damaged surface wears out the seals and the fork will leak.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 19232-01\u003c\/p\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":58842135822710,"sku":"19232-01","price":252.2,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/19232-01-0.jpg?v=1790666321"},{"product_id":"ohlins-anschlagpuffer-dh38","title":"Öhlins DH38 bump stop","description":"\u003cp\u003eBumpers for the Öhlins DH38 dual-crown suspension fork, compatible with all DH38 models. The rubber bumpers prevent the stanchions from hitting your frame. The delivery includes 2 bumpers with an embossed Ö logo.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 19238-01\u003c\/p\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":58842135855478,"sku":"19238-01","price":29.3,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/19238-01-0.jpg?v=1790666320"},{"product_id":"ohlins-rxf38-m-3-ttx18-damper-cartridge-incl-spring-booster","title":"Öhlins RXF38 m.3 TTX18 damper cartridge incl. spring booster","description":"\u003cp\u003eTTX18 damping cartridge for the Öhlins RXF38 m.3, including Spring Booster. With the TTX18, you can adjust the rebound as well as the high- and low-speed compression on the RXF38 m.3. The Spring Booster seals the stanchion at the bottom of the damper leg, allowing the air in the lower leg to provide additional progression and bottom-out resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 19241-10\u003c\/p\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":58842135888246,"sku":"19241-10","price":763.85,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/19241-10-0.jpg?v=1790666320"},{"product_id":"ohlins-einsteller-kit-dh38-ttx18","title":"Öhlins Adjuster Kit DH38 TTX18","description":"\u003cp\u003eAdjuster kit for the Öhlins DH38 m.1 with TTX18 cartridge. It contains the original adjusters for rebound and compression, including the necessary mounting hardware. Use this to replace lost or damaged adjusters and restore precise damping adjustment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 19244-01\u003c\/p\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":58842135921014,"sku":"19244-01","price":74.95,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/19244-01-0.jpg?v=1790666320"},{"product_id":"ohlins-dh38-m-1-ttx18-knobs","title":"Öhlins DH38 m.1 TTX18 Compression Knob","description":"\u003cp\u003eCompression adjustment knob for the Öhlins DH38 m.1 with TTX18 cartridge. Use this to correctly reset the compression damping if the old knob is lost or damaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 19244-03\u003c\/p\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":58842135953782,"sku":"19244-03","price":74.95,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/19244-03-0.jpg?v=1790666320"},{"product_id":"ohlins-rxf36-rxf38-dh38-spring-booster-kit","title":"Öhlins RXF36\/RXF38\/DH38 Spring Booster Kit","description":"\u003cp\u003eSpring Booster kit for Öhlins RXF36, RXF38, and DH38 suspension forks. The Spring Booster sits in the damper leg and seals the lower end of the stanchion. This gives you additional progression from the air in the casting and more bottom-out resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 19297-01\u003c\/p\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":58842137723254,"sku":"19297-01","price":41.15,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/8089\/9702\/files\/19297-01-0.jpg?v=1790666320"}],"url":"https:\/\/www.mtb-raceshop.ch\/en\/collections\/federgabel-ersatzteile.oembed?page=4","provider":"MTB-Raceshop","version":"1.0","type":"link"}